Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Ford / Ford Trucks / July 2007

Tip: Looking for answers? Try searching our database.

1987 f150 transmission oil mix with motor oil??

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
:) :) - 14 Jul 2007 00:35 GMT
Here is a weird one.  I went to change the oil on my 4.9 6cylinder with
automatic transmission f150.  I had about 10 quarts of oil in it??  My
transmission fluid was down about 2 quarts?  What on earth is going on?
Can my transmission fluid even go into my engine oil?? Thanks:)
Jeff Strickland - 14 Jul 2007 01:14 GMT
Not only do the oils never mix, they go in through entirely different holes
that are next to impossible to confuse. If you are confused by the fill
holes, you should be paying somebody to do this job.

> Here is a weird one.  I went to change the oil on my 4.9 6cylinder with
> automatic transmission f150.  I had about 10 quarts of oil in it??  My
> transmission fluid was down about 2 quarts?  What on earth is going on?
> Can my transmission fluid even go into my engine oil?? Thanks:)
Whitelightning - 14 Jul 2007 02:57 GMT
> Not only do the oils never mix, they go in through entirely different
> holes that are next to impossible to confuse. If you are confused by the
> fill holes, you should be paying somebody to do this job.

Doesn't sound like he is confused about the fill holes, sounds like he was
saying
when I changed my engine oil it was way over full, and the tranny was 2
quarts low,
is there some way for them to swap fluids?

Whitelightning
Nate Nagel - 14 Jul 2007 04:22 GMT
>>Not only do the oils never mix, they go in through entirely different
>>holes that are next to impossible to confuse. If you are confused by the
[quoted text clipped - 7 lines]
>
> Whitelightning

A combination of a blown head gasket and rotted tranny cooler would do
it, but I'd think he'd have noticed other issues :)

nate

Signature

replace "roosters" with "cox" to reply.
http://members.cox.net/njnagel

:) :) - 14 Jul 2007 04:45 GMT
Hello,  Thanks for the reply.  I am going to keep an eye on it and see
if this happens again.  How about a bad rear main seal?  Would that
allow trans fluid into the engine oil?  Thanks again:)
Jeff Strickland - 14 Jul 2007 06:09 GMT
Transmission fluid and motor oil never mix unless the wrong fill hole is
used. Period.

> Hello,  Thanks for the reply.  I am going to keep an eye on it and see
> if this happens again.  How about a bad rear main seal?  Would that
> allow trans fluid into the engine oil?  Thanks again:)
SnoMan - 14 Jul 2007 13:34 GMT
>Transmission fluid and motor oil never mix unless the wrong fill hole is
>used. Period.

Yes, the whole tranny bellhousing would have to fill with oil before
it could even think about forcing it way past rear main seal into
engine and if bellhousing was full of oil you would know it because if
it ran it would be slinging out oil everwhere.
-----------------
TheSnoMan.com
david m - 14 Jul 2007 13:43 GMT
On Fri, 13 Jul 2007 23:45:22 -0400, :\) :\) rearanged some electrons to
form:

> Hello,  Thanks for the reply.  I am going to keep an eye on it and see
> if this happens again.  How about a bad rear main seal?  Would that
> allow trans fluid into the engine oil?  Thanks again:)

No.  However, it would make a nice oily spot on your driveway.
Joe - 15 Jul 2007 20:10 GMT
> Hello,  Thanks for the reply.  I am going to keep an eye on it and see
> if this happens again.  How about a bad rear main seal?  Would that
> allow trans fluid into the engine oil?  Thanks again:)

No.   There's no way to get transmission fluid into the engine.
Joe - 15 Jul 2007 20:09 GMT
>>>Not only do the oils never mix, they go in through entirely different
>>>holes that are next to impossible to confuse. If you are confused by the
[quoted text clipped - 10 lines]
> A combination of a blown head gasket and rotted tranny cooler would do it,
> but I'd think he'd have noticed other issues :)

Please, let's not confuse the issue.  The answer is definitely no, without
question.  The 10 quarts of oil got into the engine from the fill hole, or
else half of it was really water.
Jeff Strickland - 14 Jul 2007 17:33 GMT
> Here is a weird one.  I went to change the oil on my 4.9 6cylinder with
> automatic transmission f150.  I had about 10 quarts of oil in it??  My
> transmission fluid was down about 2 quarts?  What on earth is going on?
> Can my transmission fluid even go into my engine oil?? Thanks:)

I can't even figure out what your problem is! You are talking about both the
engine and transmission without enough punctuation for me to know when the
subject is changing.

What had 10qt of oil in it? The engine? That's not possible, the oil pan
capacity is only about 6 quarts when it is off the engine and sitting on
your bench. If filled to 6 or 7 while on the engine, the crankshaft will hit
the top of the oil and churn it into a serious foam bath. I've never tried,
but I think that if the crankcase was filled to 10 quarts, the pistons would
not even go down and the motor would hydro-lock

There is no direct path for the oil to flow between the engine and
transmission. The two are sealed from each other, and before they would mix,
they would spill over to the outside and leave a mess in your driveway. And,
with 10 quarts of oil in the engine, I have to think that a mess in the
driveway should have happened already.

.
Joe - 15 Jul 2007 20:12 GMT
>> Here is a weird one.  I went to change the oil on my 4.9 6cylinder with
>> automatic transmission f150.  I had about 10 quarts of oil in it??  My
[quoted text clipped - 4 lines]
> the engine and transmission without enough punctuation for me to know when
> the subject is changing.

Don't worry about it.  It was clear enough to most of us to give an answer.
He missspelled "It" and just used "I".  Once you make that change, all the
subjects and predicates fall right into line.  Punctuation, while wrong, is
in the right place.

This post could practically win an award for the use of complete sentences.
:) :) - 16 Jul 2007 02:47 GMT
Thanks to everyone for clarifying the issue.  I have come to one
conclusion.  Last time the oil was changed they must have put way too
much oil in it or the "pit" guy never pulled the plug and top guy filled
the oil and never checked the dipstick...   I have changed it myself now
and will keep an eye on it.  Thanks again to everyone!! :)Nel
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.