>> My clutch pedal is to low. There is also a sound like the throw out
>> bearing when the clutch is released. Now I am getting an occasional
[quoted text clipped - 12 lines]
>
> Whitelightning
> Sorry, my bad. 4.9 and 5 speed.
Ok given that info I would suspect the slave, not the master.
On the 5 speed tranny the slave is in the bellhousing actually slides
over the input shaft and includes the throw out bearing. Wonderful
design, not. Bear to bleed, prone to leakage, if leaking replace disc
as well at minimum..
Whitelightning
Ted - 29 Feb 2008 02:26 GMT
Thanks.
>> Sorry, my bad. 4.9 and 5 speed.
>>
[quoted text clipped - 5 lines]
>
> Whitelightning
Ted - 05 Mar 2008 03:17 GMT
I think I found the cause of the popping noise. The clutch pedal linkage to
the clutch master cylinder push rod bushing was coming apart. I picked one
up at the parts store and will put it in later this week.
Ted
> Thanks.
>>
[quoted text clipped - 7 lines]
>>
>> Whitelightning