 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Ford / Ford Trucks / September 2003360 Exhaust manifold
Just bought a '75 F150 with the 360 motor. In addition to the bad exhaust gasket, 2 of the top bolts are broken and a 3rd broke in my clumsiness. Any help on extracting the studs would be greatly appreciated. doug seattle > Just bought a '75 F150 with the 360 motor. In addition to the bad exhaust > gasket, 2 of the top bolts are broken and a 3rd broke in my clumsiness. Any > help on extracting the studs would be greatly appreciated. > > doug > seattle I used a drill bit and a Dremel tool to grind out most of the bolt, then a tap to clean out the remained on a 390 62 T-bird, which is even more cramped than your PU. It's tedious on the car, but can still be done. Good luck! Gerard  SignatureGerard's Automobile Book, Video, and DVD Store http://www.bob2000.com/booksvids.html -------------------------------------------------- Personal Home Page http://www.bob2000.com/4277.htm -------------------------------------------------- I delete old emails. Be sure to quote our previous correspondence! Change the email address to email me |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2009 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.