1997 Taurus GL, generally very good condition, about 90k miles.
If someone has any comments here, I'd really, really appreciate it!
Symptoms: Brake lights off AND cruise control stopped working. The
little green "cruise" indicator on the dash comes on fine, but when you
try to set it to a speed, nothing happens when you release the gas (i.e.
car just slows down just as it would without cruise).
I THOUGHT IT WOULD BE THE BRAKE LIGHT SWITCH BUT IT ISN'T!!!
What I've looked at:
- "Stop lamps" fuse: Checked it with light tester. FINE.
- Brake light switch: tested that one end has power - FINE! And other
end only has power when brake is pushed. FINE, switch working
perfectly, transmitting electricity when brake is pushed!
So that puts the problem somewhere "downstream" from the switch, or
potentially a wire right in the switch or nearby, didn't test those as
didn't want to do any invasive testing and the wires themselves *looked*
fine.
I'm thinking maybe there's another easy to replace switch somewhere
that's less obvious than the Brake Light switch.
Any ideas?
Ollie - 16 Nov 2006 03:08 GMT
Does the "SET" button work, try to set it a couple times witha little bit
more force
Does your car have a Coruise control switch next to the brake lite switch?
There is a way to test your cruise by pushing a button when you turn
ignition on but forgor what it was
Maybe a ford tech here can look it up online
> 1997 Taurus GL, generally very good condition, about 90k miles.
>
[quoted text clipped - 23 lines]
>
> Any ideas?
ShoeSalesman - 16 Nov 2006 23:40 GMT
> 1997 Taurus GL, generally very good condition, about 90k miles.
>
[quoted text clipped - 23 lines]
>
> Any ideas?
I bet its the multi fuction switch(if it isnt the brake switch or the
wires at the brake switch). You can lube/clean it by spraying wd40 in
the top down into the flasher switch and working the switch on and off
about 50 times. First just turn it on and off and it will probably come
back to life if thats it.