*sigh* All right, it always seems it's my lot in life to do things
the, well, not-so-easy-way.

I have a 1982 Ford F100.  It has a 3.8L V6 with a 2 barrel carb an
and
automatic transmission.  No, no, no that's not a mistype, I realize
it's rare, but that's what I have.

For some time now I've been plagued with an intermittant problem.  I
could be driving down the road, stopped or stopping at a stop light,
making a turn and the truck would die on me.  No symptom ahead of
time
except occasionally you might feel a brief moment of hesitation.  
I've
also found no real way to duplicate the problem and the problem seems
to be worse in colder weather (not THAT big of an issue here in
Houston, Texas).

For the most part what I do when the vehicle dies is put it in
nuetral
and restart it then carry about my business.  Last time the vehicle
did this, a couple of the guys at work suggested it might be some
type
of problem in the fuel tank, that some net was collapsed.  So I took
the fuel line off and blew back into the gas tank with an air
compressor and that seemed to work for about a year or so.

Then the other night during a cold-snap (please don't laugh you have
yours we have ours) the vehicle died and would not restart.  I even
tried jumping it, all to no avail and I ended up having the vehicle
towed to my brother's house.

Now I'm a computer-geek by trade, but luckily I have a brother who is
a little more mechanically minded.  He did some tinkering and got it
working.  So thinking it was crud in the tank again we blew out the
fuel lines.  Still no joy, the vehicle wouldn't start.

My brother did a little more tinkering and sprayed down the carb with
some WD-40 and that seemed to fix the problem.  He said that there
was
some carbon build-up on the carb and it was sticking.

Well it worked for about a week.  Then on the way to work one morning
it died again.  The vehicle would not immediately start back up so I
pulled over to the side of the road to let it sit a few minutes and
try it again.  After letting it sit about 10-15 minutes it started
back up again.

When it started up it sounded a little funny, there seemed to be a
whirring sound to the engine, I also heard a 'pop.'  However, the
truck was running, for a moment.

I managed to drive about 200 yards before the vehicle died again and
no amount of pleading or cursing would get it to start up again.  I
thought with all the recent start-up attempts perhaps the battery was
dead.  I had one of those jump-start-in-can devices (I don't know
what
they are really called) and tried to jump it, again NO JOY.
Truthfully it didn't even sound like the jump-start-in-a-can was
making any type of difference whatsoever.

A couple of good samartians stoped to help me out and one of them had
a larger jump unit that I did and we tried that.  While it seemed to
help the vehicle still would not start.  We did a little more
investigation and determined that the vehicle wasn't getting any
spark
to the distributor.

So second tow in about a weeks time.  This time to my house.  I
called
my brother and asked him what the problem might be (like I said he
does cars, I do computers).  He suggested the Coil.  Since it wasn't
that expensive and not that difficult to replace, I went ahead and
got
the part and did it myself.

That didn't work, so remembering what one of the samartians who
stopped to help me said about a nut on the solenoid being lose and
the
connection sparking, I examined it.

Sure enough there seemed to be a little electrical scarring on the
post nearest the battery.  So I decided to replace the solenoid and
the positive battery cable (I  was going to replace the negative as
well but jiminy crickets I couldn't figure out how to get that one
out
of there).

Now when I replaced the solenoid the entire vehicle went deader than
a
doornail.  So I tried and tried and swore I had everything hooked
back
up right but could not get any juice anywhere in the vehicle.  I
thought I might try to jump it again and the minute I tried hook the
battery cable to some type of ground on the live vehicle it looked
like I was trying to arc weld.  So I thought 'Well, that ain't
right.'  and decided to give up for the night.

The next day we pushed the vehicle over to my brothers house (no, we
didn't manually push it, he got behind me in his truck and pushed me
to his house)

Now no one could figure out why I wasn't getting any juice to the
truck.  So we replaced a couple of other electrical components in the
truck (I THINK they were the Voltage Regulator and Ignition Control,
but I can't swear to that) as well as putting another new Solenoid
in.

Turns out I had one of the wires crossed on the solenoid.  Once we
figured that out we were able to try and start the vehicle but still
no joy, but hey at least we were getting spark now.

Now after doing a little more investigation and tinkering we (well
really he because at this point I was inside working on his computer)
discovered another suspect part just off the side of the carb.  Now
we
have heard this part called several things.  Idle Stop, Anti stall
dashpot, anti stall solenoid.  On my truck this part is BOTH vacuum
and electrical and gasket helping to maintain the vacuum crumbled
into
nothingness when he touched it.

So began the search.... I have looked all over this country for that
part and not been able to find it anywhere

The manager at my local O'Reilly was very helpful.  He came outside
and looked at the vehicle (since the Truck will not run with out it).

We eventually ended up getting the tag number of off the carb and he
looked the part up.  Now we still weren't able to find the part  but
at least I feel better now about the name, according to him it's the
anti stall solenoid.

I've looked all over calling at least 20 car parts places in 7 states
and still nothing.  I've been to Pick A Part and we looked at every
Ford vehicle that wasn't fuel injected and nothing.  Most of what
we've found is EITHER vacuum OR electrical but not both.

Now I've also done some research on the internet and some of the
groups say you should be able to run the vehicle without that part.
However if we take that part off it won't idle at all.

Do you guys have any suggestions?  I mean are we on the right
track?
Considering the newsgroups say the vehicle should run without the
part
is there maybe another problem?  Do you have any idea where I can
find
the part?

If you want to see a pic of the part I've got an eBay 'Want It Now'
auction that has a crappy picture, but a picture on it -

http://tinyurl.com/2enkc9

Anti Stall Solenoid

       Ford Part Number - D7T9D857A (if this is the right part name)

Carb -         e2Te
       D  A   A
       f  2e  25

Some of the places I've looked -

Champion Ford (Parts) - 281-579-9100 (Katy, TX)
* O'Reilly  Auto Parts (Fry) - 281-578-7070 (Katy, TX)
Autozone (Fry) - 281-646-9233 (Katy, TX)
Advance Auto Part (Fry) - 281-646-8485 (Katy, TX)
Jeff's Bronco Graveyard - 248-437-5060 (Brighton, MI)
Dennis Carpenter Repro - (Skip) 704-706-8139 (Charlotte, NC)
Green Sales - (Dave) 800-543-4959 (Cincinnati, OH)
LMC Truck Parts - 1-800-562-8782 (Lenxa, KS)
Dream Sales - 1-800-543-4959 (?)
Parts Voice - 1-800-328-8766 (?)
JC Whitney - (Steven) 1-800-529-5003 X 7077
Pick A Part

I realize this was rather long, but I feel it's better to give too
much info than not enough.  Any help you could give me would be
greatly appreciated

Now tonight we've replaced the distributor cap and rotor.  And I
can't
find my Chilton book so I found the firing order on Autozone but I
don't think it's right because the vehicle is running like crap.

Here is the order I found on the web:

Firing order 1-4-2-5-3-6

Distributor rotates clockwise
                    --------
         front  | 1 2 3  |
           of    |          |
       vehicle | 4 5 6  |
                    --------

If anyone could help with any of this I'd appreciate it.