98 mustang transmission R&R

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

ANTHONY DIODATI - 25 Jul 2007 05:38 GMT

Hi All,
Need to R&R an auto transmission on an 98 mustang,to change the front seal.
Is there any thing special I need to do, or is it a pretty straight forward
job.
Thanks, Tony

Reply to this Message

Tom Adkins - 26 Jul 2007 20:49 GMT

On Jul 24, 9:38 pm, "ANTHONY DIODATI" <mrbreezeet1NOS...@verizon.net>
wrote:

> Hi All,
> Need to R&R an auto transmission on an 98 mustang,to change the front seal.
> Is there any thing special I need to do, or is it a pretty straight forward
> job.
> Thanks, Tony

Aside from being a tight fit, it's pretty straight foreward. Watch
for clearance along the firewall (up top) when lowering it. You will
likely have to remove the Y or H pipe from the exhaust to get it out.

Reply to this Message

ANTHONY DIODATI - 29 Jul 2007 20:40 GMT

> On Jul 24, 9:38 pm, "ANTHONY DIODATI" >
> Aside from being a tight fit, it's pretty straight foreward. Watch
> for clearance along the firewall (up top) when lowering it. You will
> likely have to remove the Y or H pipe from the exhaust to get it out.

Thanks Tom,

Yes I did, had to remove the 02 sensor on the right side to get to the "H"
pipe bolts.
It all went well though.
Tony

Reply to this Message

Tom Adkins - 31 Jul 2007 06:31 GMT

On Jul 29, 12:40 pm, "ANTHONY DIODATI" <mrbreezeet1NOS...@verizon.net>
wrote:

> > On Jul 24, 9:38 pm, "ANTHONY DIODATI" >
> > Aside from being a tight fit, it's pretty straight foreward. Watch
[quoted text clipped - 7 lines]
> It all went well though.
> Tony

Reply to this Message

Tom Adkins - 31 Jul 2007 06:32 GMT

On Jul 29, 12:40 pm, "ANTHONY DIODATI" <mrbreezeet1NOS...@verizon.net>
wrote:

> > On Jul 24, 9:38 pm, "ANTHONY DIODATI" >
> > Aside from being a tight fit, it's pretty straight foreward. Watch
[quoted text clipped - 7 lines]
> It all went well though.
> Tony

Great!. Glad you got it done.

Reply to this Message