>>I have a 2004 Ranger XLT 4 X 4 & I live in northern New England. A major winter storm will be approaching in a day or
>>two & the roads become slippery at times. I hear a lot about not using the 4WD on "hard pavement" but after the plows
[quoted text clipped - 16 lines]
>
> --<< Bruce >>--
>My ranger has an electronic transfer case selector & can be employed up
>to 55 MPH. The manual does state not to use 4WD on dry hard pavement
>but up here in northern Maine, it becomes difficult to see of it is dry or not. I
>just rely on my judgement & keep it in 2WD until I spot a stretch of snow then
>it is 4WD time.
I would tighten up the criteria a lot - a "stretch of snow" likely
isn't enough to allow wheel slip (to relieve stresses) if needed. If
it's fine powder snow with no ice underneath, the tires are more than
likely getting down to the pavement.
I would up the ante to only shifting into 4WD when you find
'un-plowed side street with a good 6" of snow', and other cars are not
cutting ruts down to the pavement. Not for stretches where you think
you might need it, reserve it for areas you *know* you'll need it.
Or wait till it gets sloppy enough that you feel it starting to lose
traction and/or the rear end tries coming around on you the first time
- and believe me, when it happens for real you'll know it. Next time
you can feel it getting close, shift it into 4WD then.
--<< Bruce >>--
Shawn - 04 Dec 2007 00:49 GMT
>>My ranger has an electronic transfer case selector & can be employed up
>>to 55 MPH. The manual does state not to use 4WD on dry hard pavement
[quoted text clipped - 18 lines]
>
> --<< Bruce >>--
Today, we got eighteen inches & it was 4WD all the way. I saw no black
top whatsoever, just white as far as the eye can see. Stopping was a big
problem & even with ABS it proves to keep a safe distance from the vehicle
in front & slow down.