Hi all,
I have a 93 ford Taurus 3.0 having probs getting started to run?
I have done new plugs and checked the wires and new cap and rotor button.
What is happening is it will start then immediatly stop? When I step down on
the excelerator it will start and stop again?
I have spark and seems to be getting gas. It also seems like when you let go
of the key or gas peddle it stalls back out??
Any hjelp would be appreciated.
Thnaks
Shawn
Kevin Torkelson - 25 Aug 2004 01:40 GMT
I had the same problem, it was the TPS (throttle positioning sensor)
> Hi all,
> I have a 93 ford Taurus 3.0 having probs getting started to run?
[quoted text clipped - 9 lines]
> Thnaks
> Shawn
Charles B. Summers - 25 Aug 2004 02:57 GMT
Soleniod?
> Hi all,
> I have a 93 ford Taurus 3.0 having probs getting started to run?
[quoted text clipped - 9 lines]
> Thnaks
> Shawn
Backyard Mechanic - 25 Aug 2004 04:29 GMT
> Hi all,
> I have a 93 ford Taurus 3.0 having probs getting started to run?
[quoted text clipped - 9 lines]
> Thnaks
> Shawn
this is confusing... please describe step by step..
are you are saying when you let the key out of the start to the run position,
it stalls?
When you first try it, does it start without touching the pedal?