Central Locking

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Keith - 26 May 2005 17:00 GMT

Does anyone know how to change the operation of the 3 button ford key. I
have read that when you press the unlock button once it will open just the
driver's door, then a 2nd press opens all the doors, OR you can change this
so that just 1 press of the button opens ALL the doors. Does anyone know how
to change between the 2 modes? I have a 2000 Mondeo but I believe it may be
the same for many models with the 3 button key.

Thanks

Reply to this Message

dold@XReXXCentr.usenet.us.com - 26 May 2005 19:58 GMT

> Does anyone know how to change the operation of the 3 button ford key. I
> have read that when you press the unlock button once it will open just
> the driver's door, then a 2nd press opens all the doors, OR you can
> change this so that just 1 press of the button opens ALL the doors. Does
> anyone know how to change between the 2 modes? I have a 2000 Mondeo but I
> believe it may be the same for many models with the 3 button key.

http://myford.fordvehicles.com - Resource Center
lets me download an owner guide for my 2005 Escape. I don't see the Mondeo
on the list, but maybe there's an equivalent site in the UK.

Switching from two step to one step door unlocking
Unlocking can be switched between two step and one step door
unlocking by pressing and holding both LOCK and UNLOCK buttons
simultaneously on the remote entry transmitter for approximately 4
seconds. The parklamps will flash twice to indicate that the vehicle has
switched to one step unlocking. Repeat the procedure to switch back to
two step unlocking.

Signature

---
Clarence A Dold - Hidden Valley (Lake County) CA USA 38.8,-122.5

Reply to this Message

herby23941 - 27 May 2005 00:17 GMT

Attempted to relace power window regulator. Door locks operated until
repairman worked on power windows. Diagnosed regulator and the
master switch was bad. After diagnosing the defective components, he had
to order both parts. After I left his shop, I found the power door locks
will not work. I blamed this on the switch. When the switch was replaced,
the windows worked fine but not the locks, none of the 4 work. The drivers
lock has power to the lock and switch works, 12v and continunity from
master switch.
WHERE DO I GO FROM HERE? Mechanic is baffled and told me to take it to the
dealer.
Help anyone? herby

Reply to this Message