Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Ford / Ford Cars / July 2005

Tip: Looking for answers? Try searching our database.

Electrical Problem

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
sprty40 - 24 Jun 2005 00:16 GMT
I recently purchased a 1940 Ford Coupe that is in great shape! However, I
appear to be having charging problems. The battery is a brand new 6 volt
unit, the voltage regulator appears to be brand new, and the ampmeter
registers charge as the car is driven. I am able to start the car after a
trickle charge, and it performs well for one day. When I shut it off, it
re-starts with no problems at all. However, the next day all you can hear
is the click of the solonoid when you press the starter button. I believe
it is a positive ground system, but even though the ampmeter appears to
show positive charging, it acts like it has negative polarity.I have tried
reversing the cables, and the car does start and run, but the voltage meter
emits a a high pitched hum. I have checked the ground connection to the
frame and the starter posts. There is no rust and the connectios are
sound. Does anyone have any ideas where to start on the problem.
Big Al - 24 Jun 2005 01:59 GMT
>I recently purchased a 1940 Ford Coupe that is in great shape! However, I
> appear to be having charging problems. The battery is a brand new 6 volt
[quoted text clipped - 10 lines]
> frame and the starter posts. There is no rust and the connectios are
> sound. Does anyone have any ideas where to start on the problem.

It is positive ground, do not reverse the cables. Run the car for a day,
disconnect the positive cable. Connect it in the morning and see if it
starts. Let us know if it does or does not.

Al
sprty40 - 04 Jul 2005 14:03 GMT
Big Al:
I did what you suggested, I ran the car for a day,disconnected the
positive cable overnight, and started the car the next morning. It worked
two days in a row. I noticed when I connected the cable in the morning,
the voltage regulator made one loud "clic". I'm thinking the voltage
regulator is defective or there's a wiring problem. What do you think?
Thanks for your suggestions.
Al
thewa2see@gmail.com - 24 Jun 2005 04:50 GMT
>I recently purchased a 1940 Ford Coupe that is in great shape! However, I
>appear to be having charging problems. The battery is a brand new 6 volt
[quoted text clipped - 9 lines]
>frame and the starter posts. There is no rust and the connectios are
>sound. Does anyone have any ideas where to start on the problem.

ya dumb foctard
prolly focked up everything when ya reversed the cables
ever check for a parasitic draw
YA FOCKTARD

hu
r
c
a
s
t
Rob - 03 Jul 2005 19:26 GMT
> I recently purchased a 1940 Ford Coupe that is in great shape! However, I
> appear to be having charging problems. The battery is a brand new 6 volt
[quoted text clipped - 9 lines]
> frame and the starter posts. There is no rust and the connectios are
> sound. Does anyone have any ideas where to start on the problem.

probable the regulator is sticking on and draining the battery
i rewired a 1951 dodge years ago.... found the wires from the generator
in very poor condition(insulation fell off to the touch) so i put in
heavier wire ( on gauge thicker)..... now i cant get the charging system
to work proper... there was sposed to be a slight ...(like .5 ohm or
less i can remember) resistance to the wire dropping the gen output
voltage just about .5 volt to the regulator... with the heavier wire it
didn't do this so the voltages were all wrong and then the regulators
"CUTOUT" stuck on killingthe battery.
sprty40 - 04 Jul 2005 14:31 GMT
Rob,
Thanks for the info. It sounds like I may have a similar problem. I'll
check out the wiring from the generator and voltage regulator. Since it's
new, maybe it was replaced with the wrong guage wire. Thanks for your
help!
Al
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.