Help: Fort tempo problem

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

wizardofsnog - 25 Jun 2005 04:10 GMT

Hi.. I have a 92 Ford Tempo, 4 banger.. The problem is with the
dashboard blowers. I cannot get the vents to work properly. The blower
unit will blow thru the Floor/defrosters, but not thru the dashboard
vents. is there some sylanoid somewhere I should check? In my Haynes
repair manual, there isn't much info on this subject.

Thanks.

Reply to this Message

Rob - 03 Jul 2005 19:16 GMT

> Hi.. I have a 92 Ford Tempo, 4 banger.. The problem is with the
> dashboard blowers. I cannot get the vents to work properly. The blower
[quoted text clipped - 3 lines]
>
> Thanks.

tempo hmm not sure but the heater controls are probably cables...... you
will have to dissassemble the dash controls and find out

Reply to this Message

KENNETH MCABEE - 05 Jul 2005 03:57 GMT

I had a tempo with the same problem. It would not change, there was no
solenoid, it was the cable that was broken on the back of the controls. The
controls were all manual cables, no vacuum was used. I was able to reach up
from under the dashboard, disconnect the cables and set the system to blow
defrost. At least that kept the windows defrosted.

>> Hi.. I have a 92 Ford Tempo, 4 banger.. The problem is with the dashboard
>> blowers. I cannot get the vents to work properly. The blower unit will
[quoted text clipped - 5 lines]
> tempo hmm not sure but the heater controls are probably cables...... you
> will have to dissassemble the dash controls and find out

Reply to this Message