Anyone useing Holley 950 Commander Software?

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

HiPerformance289 - 18 Sep 2005 21:42 GMT

I'm trying to get the Holley Commander 950 software to work with a USB port.
I've got the serial to USB adapter and driver installed but am having
difficulty getting the software to read the ECU.
I've tried both comm1 and comm2 but get the message telling me that the ECU
isn't powered on (yeah it is!). Maybe the port settings like speed or stop
bits?
I'd appreciate hearing from you if you have this configuration working.
Thanx

Reply to this Message

Backyard Mechanic - 19 Sep 2005 00:56 GMT

I dont know a freaking thing about the holley product but I suspect the
software is looking for a cable term... most likely either CD or DSR/MR.

If your USB/ser driver has access to spoof these, try it.

Reply to this Message

usenet@mylounge.com - 30 Sep 2005 00:30 GMT

You should go to the device manager with your serial port adapte
installed to verify which serial port is in use the select the sam
port in the 950 software under Comm. Settings are 8N1 with shateve
speed your adapter will support. Hope this helps.

Jame

--
jghflys@cox-internet.co

Reply to this Message