I think your VEHICLE is too small to realize the full potential of the 460.

Two major considerations are max useable engine RPM which
your cam grinder should be able to help with and the
displacement of the engine which you can calculate easily.
As far as your HP & torque numbers, thay are a bit
optimistic with a 650 carb - I don't know that that size
carb can produce those numbers.  If you use "calculate
carburetor size" in Google, you will find numerous
calculators.  If your engine can produce 100% volumetric
efficiency which few naturally aspirated engines can
achieve, it will need something over 800 cfm at 6000 rpm.  I
don't know for sure but, I think your cam duration is 240
(typo?) with a .525" lift which should give you good mid
range if properly installed and timed.  This is a relatively
mild grind for good torque.  I would suspect that your
engine would not produce peak HP much above 5000 rpm if that
much with that duration and lift.  If that is the case, the
650 will be about right.  The worst thing you can do for
your engine is over carb it.  It will only gag coming off
the bottom end.  Forget what your "buds" are telling you and
go with the what the numbers tell you.   Unless your Scout
is strengthened considerably with much improved brakes and
chassis, I would not want to unleash the full potential of
your 460 very often - it will break things.

Lugnut