Power Windows stuck

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Eric Toline - 31 Mar 2006 15:32 GMT

The rear door pw's on my '99 Taurus are stuck in the up position.
Niether the individual door controls or the divers master window
controls work. The question is, how does the drivers inner door panel
come off after the screws are removed?

Eric

Reply to this Message

Mortimer Schnerd, RN - 31 Mar 2006 20:37 GMT

> The rear door pw's on my '99 Taurus are stuck in the up position.
> Niether the individual door controls or the divers master window
> controls work. The question is, how does the drivers inner door panel
> come off after the screws are removed?

1. Disconnect the battery ground cable. For additional information, refer to
«Section 414-01».

2. Remove the front door trim panel screws.

3. Remove the front door trim panel.

Note:
The front door trim panel has five two-part pin-type retainers. Then male part
of the trim retainer will remain with the trim panel and the female part will
remain with the door.

Note:
To release the door trim panel pin-type retainers, first pull outward on the
bottom of the door trim panel.

4. Disconnect the electrical connectors.

Signature

Mortimer Schnerd, RN

mschnerd@carolina.rr.com.REMOVE

Reply to this Message