mondeo will not start

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

lucylu - 07 Apr 2006 23:11 GMT

mondeo 1.6 petrol M Reg zetec engine 16v
can anyone help was driving along and car just cut out, and has never started
again when turning the key it just clicks and engine fan cut straight in,
have had 2 diagnostics done but they did not show anything.
have changed the ECU but seems like power is not getting to it, someone said
it could be pats or the coil on pats but dont now where the coil is can
anyone give me any advice
thanks

Reply to this Message

Backyard Mechanic - 07 Apr 2006 23:17 GMT

> mondeo 1.6 petrol M Reg zetec engine 16v
> can anyone help was driving along and car just cut out, and has never
[quoted text clipped - 4 lines]
> where the coil is can anyone give me any advice
> thanks

who did the diagnostics?

If it just 'clicks' when you try to start, sounds like basic electrical
problem.

Signature

Yeh, I'm a Krusty old Geezer, putting up with my 'smartass' is the price
you pay..DEAL with it!

Reply to this Message

lucylu - 07 Apr 2006 23:37 GMT

>> mondeo 1.6 petrol M Reg zetec engine 16v
>> can anyone help was driving along and car just cut out, and has never
[quoted text clipped - 6 lines]
>If it just 'clicks' when you try to start, sounds like basic electrical
>problem.

i had 2 different guys both been doing it for years one works for fords got
all the machines in the vans for the diagnostics and they could not get a
reading any idea where to start on basics , just brought a cd from ebay with
garage wiring details on it waiting for it to come

Reply to this Message

Backyard Mechanic - 08 Apr 2006 00:05 GMT

>>> mondeo 1.6 petrol M Reg zetec engine 16v
>>> can anyone help was driving along and car just cut out, and has
[quoted text clipped - 13 lines]
> brought a cd from ebay with garage wiring details on it waiting for it
> to come

Lucy, if they couldnt get a reading... it probably has no power.

Dunno why Brit fords dont have engine lites! Your problem probably is in
the relay panel which supplies power.

Ask on
contour.org

Perhaps someone there has had similar problems, esp if it is 1995 or
later.... Yanks dont know "reg M" from diddly, you know

Signature

Yeh, I'm a Krusty old Geezer, putting up with my 'smartass' is the price
you pay..DEAL with it!

Reply to this Message

lucylu - 08 Apr 2006 00:17 GMT

>>>> mondeo 1.6 petrol M Reg zetec engine 16v
>>>> can anyone help was driving along and car just cut out, and has
[quoted text clipped - 12 lines]
>Perhaps someone there has had similar problems, esp if it is 1995 or
>later.... Yanks dont know "reg M" from diddly, you know

will have a look on contour.org thanks M Reg is 1996

Reply to this Message

ford_technical_ - 08 Apr 2006 11:50 GMT

when you turn the ign to positon 2 wot does the PATS light do? if it
flashes like mad then its a PATS problem
since you've already changed the PCM then the PATSwill have to be
reproggrammed cos its a comined unit(altho early ones where separate, a
small black box which would often burn out)

Reply to this Message