> > why do you assume it needs a flush?
> >
[quoted text clipped - 6 lines]
> will occur if it is not changed now. Thought I would error on the safe side. I
> don't know (?) G.S.
Your car probably does need a drain & fill with water & w/an oxalic acid flush
stuff. Then a flush and drain. And another flush, drain, and fill with
appropriate green stuff mixed with DISTILLED water. Every two years. Not
5yr/150k folklore.
Bottom drain is usually opposite side of radiator from intake hose.
Top bleed is usually at the highest points of radiator, engine, and hoses.
Seek and ye shall find.
Gail Storm - 01 Nov 2005 04:45 GMT
> > > why do you assume it needs a flush?
> > >
[quoted text clipped - 14 lines]
> Top bleed is usually at the highest points of radiator, engine, and hoses.
> Seek and ye shall find.
Is there also a block drain? Never heard of oxalic acid flush stuff but I don’t
do much work on my autos anymore, as I no longer have the flexibility of youth.
I also read on the Internet about the old ethylene glycol, green stuff and it
appears that some say it works and visa versa. The Buick manual states the
warranty is void if coolant other than DEX-COOL is used. Don’t understand why,
perhaps it has something to do with aluminum versus cast iron blocks? Thanks for
your help. G.S.
=AB Paul =BB - 01 Nov 2005 06:39 GMT
> > Your car probably does need a drain & fill with water & w/an oxalic acid flush
> > stuff. Then a flush and drain. And another flush, drain, and fill with
[quoted text clipped - 11 lines]
> perhaps it has something to do with aluminum versus cast iron blocks? Thanks for
> your help. G.S.
Oxalic acid is what many of the flushes contain. That and an a grease solvent.
Read up on Death-Cool, oops I meant Dex-Cool and class action lawsuits on the web.
Nearly all antifreeze now-a-days has the appropriate corrosion inhibitors for both
Al and Fe. You did not say what engine is in your car, I assume 3.8 or 3.4.
I havn't seen block drains on cars in a long time.
Gail Storm - 01 Nov 2005 22:57 GMT
Gail Storm wrote:
> > Your car probably does need a drain & fill with water & w/an oxalic acid flush
> > stuff. Then a flush and drain. And another flush, drain, and fill with
[quoted text clipped - 11 lines]
> perhaps it has something to do with aluminum versus cast iron blocks? Thanks for
> your help. G.S.
Oxalic acid is what many of the flushes contain. That and an a grease solvent.
Read up on Death-Cool, oops I meant Dex-Cool and class action lawsuits on the
web.
Nearly all antifreeze now-a-days has the appropriate corrosion inhibitors for
both
Al and Fe. You did not say what engine is in your car, I assume 3.8 or 3.4.
I havn't seen block drains on cars in a long time.
Sorry about that Paul, engine is a 3.1 V6. As to block drain, I must have been
sleeping when they remove those! I did see some of the negative reports about
the new coolant used in today’s radiators. I talked to the dealer about it and
obviously he said DEX-COOL, the independent service guy said whichever one I
want but would not offer an opinion except to say if he put in green I can’t go
back to original coolant. Thanks again for the update.
<RJ> - 01 Nov 2005 15:08 GMT
>> Owner manual states 150,000 miles or 5 years whichever comes first. Only 10k
>> miles but Buick said it should be changed as the car is at the 5-year point.
[quoted text clipped - 4 lines]
>> will occur if it is not changed now. Thought I would error on the safe side. I
>> don't know (?) G.S.
The big problem with "do it yourself"
is where to dispose of the old coolant.
You're not supposed to dump it in the drain,
in the streets or in the storm sewers......
<rj>
Gail Storm - 01 Nov 2005 22:58 GMT
> >> Owner manual states 150,000 miles or 5 years whichever comes first. Only 10k
> >> miles but Buick said it should be changed as the car is at the 5-year point.
[quoted text clipped - 11 lines]
>
> <rj>
I live in a very remote area <rj> we do not have storm drains or sewers. I think
there is a service in town that will take it but not sure.