How in the world do I rethread or "WHATEVER THE HELL" to replace the hood latch cable on a 97 blazer.........I HAVE TO GET UNDER MY HOOD AND I MEAN NOW........ I'M NOT TOTALLY STUPID WHEN IT COME TO AUTO..........BUT THIS ONE HAS GOT ME STUMPED.......... ANY HELP WOULD BE WELCOME
--
chevy girl
chevy girl - 19 Feb 2006 06:04 GMT
OK VIEWERS......... IM IN A DESPERATE SITUATION WITH GETTING MY HOOD OPEN ,THE CABLE HAS SUCKED UP INSIDE THERE ARE NO PLIERS ISSUIES THAT WILL HELP WITH PULLING ON CABLE....... HOW DO I "JIMMY " OR SOMETHING TO AT LEAST GET MY HOOD OPEN?????????/ THEN HOW DO I FIX THE DAMN THING.........RESPONSES PLEASE AND THANK
DESPARATION IS A SERIOUS THING NO
--
chevy girl
=AB Paul =BB - 19 Feb 2006 17:33 GMT
> How in the world do I rethread or "WHATEVER THE HELL" to replace the hood latch cable on a 97 blazer.........I HAVE TO GET UNDER MY HOOD AND I MEAN NOW........ I'M NOT TOTALLY STUPID WHEN IT COME TO AUTO..........BUT THIS ONE HAS GOT ME STUMPED.......... ANY HELP WOULD BE WELCOMED
>
> --
> chevy girl
If you can't open the hood by reaching the latch either by hand or
with some sort of tool, then you will either have to cut a hole
in the hood above the latch or cut out the grill.
Woody - 19 Feb 2006 18:34 GMT
I don't have a Blazer but on my van and car the release lever sticks towards
the front in front if the radiator and condenser far enough to be reached
from underneath with a rod or something to push it up. You may have to
remove some trim shields under the front.
> How in the world do I rethread or "WHATEVER THE HELL" to replace the hood
> latch cable on a 97 blazer.........I HAVE TO GET UNDER MY HOOD AND I MEAN
> NOW........ I'M NOT TOTALLY STUPID WHEN IT COME TO AUTO..........BUT THIS
> ONE HAS GOT ME STUMPED.......... ANY HELP WOULD BE WELCOMED
ernie - 19 Feb 2006 19:17 GMT
I just looked at my GM car hood latch it should not be much different
from your Blazer.Look through the grill at middle of hood, at the
bottom of the latch
there is a cable attached to a lever put a long screwdriver behind
lever and pry
toward cable this should trip latch. Good luck.
ernis
Michael Keefe - 23 Feb 2006 13:10 GMT
On 2/19/06 12:41 AM, in article chevy.girl.23h5er@no-mx.carstalk.net, "chevy
girl" <chevy.girl.23h5er@no-mx.carstalk.net> wrote:
> How in the world do I rethread or "WHATEVER THE HELL" to replace the hood
> latch cable on a 97 blazer.........I HAVE TO GET UNDER MY HOOD AND I MEAN
> NOW........ I'M NOT TOTALLY STUPID WHEN IT COME TO AUTO..........BUT THIS ONE
> HAS GOT ME STUMPED.......... ANY HELP WOULD BE WELCOMED
Under the hood there are 4 screws attaching the grill to the front. Take
those out, then you can get to the 2 bolts that hold the hood latch on. Take
them out and the hood will open.