Dear Sirs,

We are pleased to inform you that we manufacture specialty chemicals
for lead acid batteries for last 10 years.

Our products are innovative and developed by our own research and
development efforts.

Sulfation of negative plates is the number one cause for battery
failure and loss of power storage capacity. Sulfation is like a slow
poison for your batteries. Many chemicals have been offered in past to
remove sulfation but most are ineffective even the electronic
desulfators have limitations.

No battery is free from risk of irreversible sulfation as without
sulfation no power can be generated from the battery.

To manufacture a very powerful IRREVERSIBLE SULFATION INHIBITOR CUM
IRREVERSIBLE SULFATION REMOVER we developed BATCURE.

BATCURE is a very powerful formula to keep your batteries free from
irreversible sulfation even under deep cycling conditions and prolonged
discharged conditions.

BATCURE is world's most cost effective battery revitalize, easy to
use, and most trusted/guaranteed formula.

We serve globally. We will reply your every question related to battery
as soon as we can.

Try to believe what we claim.

Thanks,

SURESH PANDYA

K.V.INTERNATIONAL,

405,ABHISHEK CENTRE,

SECTOR-11,

GANDHINAGAR-382017

GUJARAT, INDIA.

MOBILE: 0091-9824035699

EMAIL:  admin@batcure.com

            kv045@hotmail.com

Ron Mundy

R. & R. Solar & Wind Energy Co.

1500-B Coppermine Rd.

P.O. Box 302

Page, Az. 86040

(928) 645-4002 or (928) 645-5002

Fax (928) 645-9059 (Pls. call first)

Website:  rrsolarwind.com

Email: rrsolarwind@aztrail.com

====================================================================================

BATCURE

(IRREVERSIBLE SULFATION INHIBITOR CUM IRREVERSIBLE SULFATION REMOVER)

====================================================================================

     DON'T LET YOUR BATTERIES DIE.

    Most of the industrial and auto batteries fail   or under perform
due to irreversible sulfation. Irreversible sulfation also leads to
many

   Other problems   for the battery banks. In order to solve the
irreversible sulfation problem we studied   in detailed and set before

   Us various questions relating to irreversible sulfation.

What is IRREVERSIBLE SULFATION?
What is reversible and irreversible sulfation?
What electrochemical changes take place in irreversible sulfated
batteries?
Why irreversible sulfated batteries do not hold charge?
Why irreversible sulfated batteries generate more gasses?
Why irreversible sulfated batteries generate more heat?
Why irreversible sulfated batteries consume more water?
Why and how irreversible sulfated batteries produce more stress +ve
plates?
Why   irreversible sulfated batteries show higher IR (internal
resistance)?
How irreversible sulfation developed on -Ve plates?
What are the factors responsible for higher rate of irreversible
sulfation?
What precautions are required at battery manufacturing stage?
How to identify the irreversible sulfation into the battery?
How to prevent irreversible sulfation?
How to remove irreversible sulfation crystals from the batteries?

How   to save batteries and get best out of batteries?

How much saving can be made if batteries are free from irreversible
sulfation?
How much can be saved by irreversible sulfation removal?

We are sure you are using the best equipments/test instruments to
monitor your batteries. These instruments will help to
Find out and check the battery health. However, you must have a remedy
on your hand to correct the problem immediately
If you find that your battery is working below the capacity and needs
battery medication.

We therefore request you to add BATCURE in your batteries to keep your
batteries healthy. We are pleased to inform you
That we have succeed in addressing all these questions and come out
with a very cost effective ready to use product with
Guaranteed results. We therefore strongly recommend to battery
manufacturers and battery users to try our research
Product BATCURE. We have many success stories of BATCURE. We would love
to have your success story
Too with BATCURE.
BATCURE is applicable to all types of lead acid batteries, wet, dry,
sealed, VRLA, auto,
Industrial, flat plates or tubular.

BATCURE is recommended for all application batteries, like solar,
telecom, railways, power plants, inverter,

UPS, DC equipments, boats, auto, electric vehicles, recreation
vehicles, golf carts, forklifts, army, navy,

Defense, submarines, and any other application where the batteries are
used.

HOW TO IDENTIFY IRREVERISBLE SULFATED BATTERY?

Irreversible Sulfated batteries when put to charge give excessive
gassing as compared to normal healthy battery.

Irreversible Sulfated batteries when put to charge pick up more heat
then a normal battery.

Irreversible Sulfated battery electrolyte gravity does not increase
irrespective of long hours of charge.

.

Irreversible Sulfated charged battery would have very high
self-discharge, battery volts drop within 12 hours.

Irreversible Sulfated battery will show lower online open circuit volts
when being charged, 12V battery

Will show maximum   14V and 6V battery will show 7V irrespective of
high current input.

FOR BATTERY USERS:
APPLICATION OF BATCURE IN IRREVERSIBLE SULFATION INHIBITION FOR A NEW
BATTERY:

When new batteries are first filled with electrolyte, ensure to add 2.5
ml BATCURE per liter of acid volume.

One should use electrolyte that contains BATCURE in acid so that if
there is any sulfation on negative

Plates during its manufacture to sales period can be removed and
subsequent sulfation possibilities are eliminated.

APPLICATION OF BATCURE IN IRREVERSIBLE SULFATION REMOVAL:

The premature capacity loss of a battery is mostly attributed to
IRREVERSIBLE SULFATION of negative plates.

IRREVERSIBLE SULPHATION of negative plates may results from several
reasons. The major reasons are

Incorrect negative paste formula, insufficient drying and curing,
improper formation, aerial oxidation of freshly formed

Negative plates in the battery if the negative plates active material
(spongy lead)

Get contaminated due to Antimony or other metals like Iron or Cooper.
If the batteries are left in discharged condition

For a longer time or frequent deep discharged are allowed then there
will be irreversible sulfation of negative plates.

The irreversible sulfated battery when put to charging begins gassing
soon, no increase in electrolyte gravity, and enhanced heat

Generation is the symptoms of irreversible sulfated battery. In order
to achieve the optimum life and performance

Of the batteries, it is most important that negative plates remain
absolutely free from IIREVERSIBLE SULFATION.

To remove irreversible sulfation from negative plates and revive the
battery power storage capacity, we recommend

Following procedure.

For   Wet   Batteries:

First find out the volume of electrolyte in each cell (compartment) of
a battery from technical data of the battery.

Then add 5 ml BATCURE per liter of electrolyte volume. Mix well using
hydrometer. The electrolyte will give reddish

Yellow color. Keep the battery idle for 12 to 24 hours till the color
of electrolyte becomes water white. If the

Plates are heavily sulfated it may take some more time to disappear the
color. If a particular cell is mechanically

Damaged then no change in color will take place. Such battery is
discarded. Once the electrolyte becomes colorless

Then battery is put to charge. Carry out 3 to 4 charge/ discharge
cycles for complete removal of irreversible sulfation.

Battery will regain its lost power storage capacity.

VRLA type maintenance free sealed batteries:

Carefully break open the vent plug and then remove the underneath
rubber cap. Inject BATCURE in each cell for the following size
batteries.

5 ml BATCURE in each cell for 30ah to 50 ah battery.

8 ml BATCURE in each cell for 55 ah to 100 ah battery.

10 ml BATCURE in each cell for 110 to 150 ah capacity battery.

14 ml BATCURE in each cell for 155 to 200 ah capacity battery.

Add required quantity of distilled water up to plate height. Tilt the
battery few times for uniform mixing

Inside the battery. Leave the battery idle for 12 to 24 hours. Then
carry out 3 to 4 charge/discharge

Cycles to completely remove irreversible sulfation.  Refit the rubber
cap and reseal the battery

With suitable adhesives.

BATCURE treatment is avoided in a bulged sealed battery, as there is a
risk for gas bursting with pressure.

The above graph shows the actual test results of BATCURE on deep cycle
golf cart batteries.  6 numbers

Unserviceable batteries of 6V/75 AH capacity were treated with BATCURE
in each cell. The batteries

Were then put to charge /discharge cycles. After 7th cycle the
batteries had come back to more than 95% capacity.

Results submitted to us by South African company.

LIMITATIONS OF BATCURE:
(1)    If the cell is short internally.

(2)    If the cell has mechanical damage.

(3)    If the old batteries are in unused condition for more than 3 to
6 months.

(4)    If the positive plates active material has excessive shedding.

(5)    Battery must have at least   minimum 10% capacity of its rated
capacity.

FOR BATTERY MANUFACTURERS:
APPLICATION OF BATCURE IN NEGATIVE PASTE:
Addition of 1 ml. BATCURE per kilo of Lead Oxide in negative plate
paste helps to control

Formation of tetra basic leads sulfate crystals and allows more
tribasic lead sulfate

To form. Higher tribasic helps to prevent irreversible sulfation of
negative plates, uniform charge

Distribution during formation, enhanced charge acceptance for quick
formation and

Higher negative plate volts. Addition of BATCURE eliminates the need
for addition

Barium Sulphate and Lignin.

Procedure:

Depending on weight of Lead Oxide take required quantity of BATCURE
(1ml BATCURE per 1 kilo Lead Oxide).

Dilute into to distilled water to be used for addition to Lead Oxide.
Mix it well. Then add diluted BATCURE solution in distilled

Water into Lead Oxide powder. Mix it well for 20 to 25 minutes in a
mixture. Then start addition

Have required quantity of sulfuric acid in a such way that paste
temperature remains below

50 degree centigrade. (Quantity of water and concentration of acid
required for paste making

Depends on free lead content in oxide.)

APPLICATION OF BATCURE IN PREVENTING AERIAL OXIDATION OF FRESHLY FORMED
NEGATIVE PLATES

(DRY CHARGE PROCESS):

At the end of formation process, negative plates are in highly active
condition and are in strongly

Reduction stage. If such plates are not protected from air contact then
the negative plates will

Begin to absorb oxygen from air and will react violently to reform lead
oxide and lead sulphate

With exothermic reaction. This will result in the permanent damage to
negative plates and such

Plates are more prone to irreversible sulfation during battery service
life. There will also be a loss of negative

Plate's volts.  It is utmost important to protect freshly formed
negative plates from aerial oxidation.

The freshly formed negative plates are immersed immediately into a
solution containing

15 to 20 ml BATCURE per liter of water. The negative plates are soaked
into this solution

For 36 hours. The negative plates may be then removed from solution and
dried in a less ventilated room

At room temperature. The negative plates must not be washed after
removal from the solution.

. BATCURE film formed on negative plates helps to protect negative
plates during the storage and

Prevents sulfation during battery service life. The strength of the
BATCURE in dipping

Solution is maintained periodically by addition of BATCURE and water.
We recommend

Adding 50 ml. BATCURE for a 100-liter solution per 1000 numbers of
standard size plates.

The dipping solution bath may be prepared fresh after 3 months.

BATCURE IS VERY COST EFFECTIVE AS COMPARED TO ELECTRONIC DESUFATORS.

BATCURE WORKS FROM INSIDE THE BATTERY AND ON THE SULFATION SITES.

BATCURE DOES NOT USE BATTERY'S POWER FOR ITS RESULTS AS IS THE CASE
OF

ELECTRONIC DESULFATORS.

BATCURE GIVES RESULTS WITHIN 24 HOURS WHILE E LECTRONIC DESULFATORS

TAKE TOO LONG TO REMOVE SULPHATION.

We welcome   your comments and request for trial samples. We are
looking for technically and financially sound distributors all over the
world.

PLEASE SHARE YOUR BATTERY PROBLEMS WITH US; WE WILL TRY TO FIX THEM.

For more details, please write to us

K.V.INTERNATIONAL,

405, ABHISHEK CENTRE,

SECTOR-11, GANDHINAGAR-382017, GUJARAT-INDIA

FAX: 0091-7923232070

MOBILE:  0091-9824035699

E   EMAIL: admin@batcure.com

                 kv045@hotmail.com,

We also manufacture ELECTROGEL- Synthetic Polymer Gel Electrolyte
(non-silica base),

Lead Metal Refining agent to remove most impurities from recycled lead
to international standards.