95 Lesabre ABS not working

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Alpha One - 31 Dec 2006 08:18 GMT

The ABS on my 95 Lesabre is not working. The light is continuously on. I
found a broken connection to mass and reconnected it but it is not working
still. I checked all four wheels and all four are working. I read that the
ABS/CTS code 45 may be set if there is a broken connection. Do I have to
reset the code before it will work? How do I do that?

Thank you

Reply to this Message

Shep - 31 Dec 2006 16:00 GMT

The system resets itself when the problem is corrected, it should be scanned
with an abs function scanner to look at wheel speed sensor inputs, which are
the most common problem.

> The ABS on my 95 Lesabre is not working. The light is continuously on. I
> found a broken connection to mass and reconnected it but it is not working
[quoted text clipped - 3 lines]
>
> Thank you

Reply to this Message

Alpha One - 31 Dec 2006 23:51 GMT

It did correct itself and is working ok now. The broken groung connection
was the problem. The reason why it didn't work immediatly was because I
forgot to connect another cable I had disconnected. Thank you.

> The system resets itself when the problem is corrected, it should be
> scanned with an abs function scanner to look at wheel speed sensor inputs,
[quoted text clipped - 13 lines]
> ----= East and West-Coast Server Farms - Total Privacy via Encryption
> =----

Reply to this Message