Changing timing belt -- CIVIC 98

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Blackhill - 30 Mar 2005 02:36 GMT

Hi!

I'm changing the timing belt on my Civic (130 000K) over

the weekend and I was wondering if someone had

a tip on how to maintained the timing on the "CAMS"

Thanks!

Blackhill.

Reply to this Message

disallow - 30 Mar 2005 02:46 GMT

there is a marking on the engine block for where
the crank pulley needs to be, and the camshaft
should have a marking on it that should be at 90
degrees to the top of the engine.
t

Reply to this Message

John Ings - 30 Mar 2005 14:04 GMT

>I'm changing the timing belt on my Civic (130 000K) over
>
>the weekend and I was wondering if someone had
>
>a tip on how to maintained the timing on the "CAMS"

Get yourself some nail polish in a bright color. Before removing the
old belt, mark the belt, and a crankshaft and cam sprocket tooth with
the nail polish. Lay the old belt on the new one and transfer the
marks, then line the new belt's marks up with those on the sprockets.

Reply to this Message

TeGGer? - 30 Mar 2005 14:10 GMT

>>I'm changing the timing belt on my Civic (130 000K) over
>>
[quoted text clipped - 6 lines]
> the nail polish. Lay the old belt on the new one and transfer the
> marks, then line the new belt's marks up with those on the sprockets.

If you don't have a female to cadge nail polish from and don't feel
comfortable buying it yourself, you can always use Wite-Out, available at
any office supply store.

Signature

TeGGeR?

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Reply to this Message

Abeness - 30 Mar 2005 15:43 GMT

TeGGer® wrote:

> If you don't have a female to cadge nail polish from and don't feel
> comfortable buying it yourself, you can always use Wite-Out, available at
> any office supply store.

Heh heh. Some males use nail polish, too, ya know... <g>

Reply to this Message