 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Honda Cars / April 200596 Accord Ex ABS light
Hi, I had a 97 5spd EX that got totaled and it started doing but did not have enough time to investigate it. I just bought a 96 EX 4cy auto today. My ABS light stays on and makes a funny noise for about 5-10 seconds and the sound goes away but the light stays on. Does anyone have any info on this. Is there a fuse I can unpug to make the light go away and turn off ABS. ANy info is apreciate it. and thank you all in advance. why don't you just run the codes on it and find out what is wrong? > Hi, I had a 97 5spd EX that got totaled and it started doing but did not > have enough time to investigate it. I just bought a 96 EX 4cy auto today. > My ABS light stays on and makes a funny noise for about 5-10 seconds and > the sound goes away but the light stays on. Does anyone have any info on > this. Is there a fuse I can unpug to make the light go away and turn off > ABS. ANy info is apreciate it. and thank you all in advance. On 3/30/05 11:07 PM, in article Yb6dnYbjv5EHGNbfRVn-uA@comcast.com, "Brock" <buraks@comcast.net> wrote: > Hi, I had a 97 5spd EX that got totaled and it started doing but did not > have enough time to investigate it. I just bought a 96 EX 4cy auto today. My > ABS light stays on and makes a funny noise for about 5-10 seconds and the > sound goes away but the light stays on. Does anyone have any info on this. > Is there a fuse I can unpug to make the light go away and turn off ABS. ANy > info is apreciate it. and thank you all in advance. The noise is the pump trying to pressurize the system. It will try several times over a period of a few minutes, then give up and turn on the light. The light being on signals that the system has turned itself off. The only way to get rid of the light is to tape over it or remove the bulb. If you short the SCS connector & switch the ignition to position II, it will blink out a trouble code on the ABS light. there's air in the ABS modulator. the code is more than likely a "pump over-run" code. i think its a 3-1. it needs to be bleed. if you bleed it and it keep doing the same thing, get ready to spend some money. > Hi, I had a 97 5spd EX that got totaled and it started doing but did not > have enough time to investigate it. I just bought a 96 EX 4cy auto today. > My ABS light stays on and makes a funny noise for about 5-10 seconds and > the sound goes away but the light stays on. Does anyone have any info on > this. Is there a fuse I can unpug to make the light go away and turn off > ABS. ANy info is apreciate it. and thank you all in advance. '96 has a visible fluid reservoir on the ABS. Is there anything in it? If its empty, then the air diagnosis is probably part of the problem. Fill it with brake fluid. Much more likely that it can no longer maintain pressure. Very expensive to repair (> $ 1,000) and not really worth it, since the main brakes will continue to work as if it never had the ABS option. If you want to make sure, short the SCS connector and turn the ignition to position II (warning lights on - but don't start the engine). It will blink out a trouble code on the ABS light. > there's air in the ABS modulator. the code is more than likely a "pump > over-run" code. i think its a 3-1. it needs to be bleed. if you bleed it [quoted text clipped - 5 lines] >> this. Is there a fuse I can unpug to make the light go away and turn off >> ABS. ANy info is apreciate it. and thank you all in advance. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.