Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Honda Cars / April 2005

Tip: Looking for answers? Try searching our database.

Honda Civic 1.5 Lx

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
ernests131@charter.net - 04 Apr 2005 19:14 GMT
I bought a 1994 Civic last Fall and with advice
from this group have made several minor repairs.
This auto had very good care until about 2000 and
then nearly none for a couple of years which caused an
engine failure last year. The former owner had a 1995
Civic 1.5 installed. 80000miles on the 95 engine and
166000 on the Auto. This engine uses a LOT of oil, about
a qt. per tank of gas. Is there anything other than rings
that will cause this.  There is no visible smoke from the
tail pipe. No leaks, no oil in plug wells. The car runs
very well, no trouble codes and Auto transmission works fine.
This car has become something of a project and I am
considering doing the rings if I can be sure that is
the problem. It has been 30 or so years since I
restored a 1959 MGA but that engine was very simple
compared to the Honda.
It looks like you can drop the oil pan on a Civic and
remove the head without removing the engine from the
car, Is this correct?
Thanks
Ernie
mmdir2002@yahoo.co.uk - 04 Apr 2005 20:23 GMT
The leak could not be a oil pan seal. Camshaft seal. crankshaft seal.
Front balanace shaft seal. And water pump seal.  Talk about ton of
money to fix all these.
My is 16 yr old civic LX. I don't kow spend ton of $$$ to fix all
these.
WaterWatcher - 13 Apr 2005 06:00 GMT
>I bought a 1994 Civic last Fall and with advice
> from this group have made several minor repairs.
[quoted text clipped - 17 lines]
> Thanks
> Ernie

Be sure the PCV valve is working.  A plugged one can cause high oil
consumption.  Also, you could be burning oil and not seeing any smoke
because the cat removes the oil from the exhaust, at least to the extent
that it may not be visible.

WW
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.