 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Honda Cars / January 20062002 Honda Civic EX troublecodes
The engine light comes on and stays on and I took the Honda to Autozone and the troublecode #'s that came up are P1457 (unable to pull vacuum in tank) and P1298 (IDM Failure). I bought a "Haynes Repair Manual" and the codes are not listed the same. How do I figure out the codes and what they are for? > The engine light comes on and stays on and I took the Honda to Autozone and > the troublecode #'s that came up are P1457 (unable to pull vacuum in tank) > and P1298 (IDM Failure). I bought a "Haynes Repair Manual" and the codes > are not listed the same. How do I figure out the codes and what they are > for? It sounds like they used the Ford P1 list for those codes. (P0 codes are the same for all cars, but car manufacturers can pick their own P1 codes.) For Honda (from the manual for my Equus 3100 reader): P1298 Electrical Load Detector Circuit High Input P1457 EVAP Emission Control System Leak Detected (Control Canister System) Try googling OBD2 for all you want to learn and more (OBD2 is actually a pretty good troubleshooting aid). > The engine light comes on and stays on and I took the Honda to Autozone and > the troublecode #'s that came up are P1457 (unable to pull vacuum in tank) > and P1298 (IDM Failure). I bought a "Haynes Repair Manual" and the codes > are not listed the same. How do I figure out the codes and what they are > for? is the gas cap original? tightened properly after filling? |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2009 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.