Hi,
My 98 accord has emission light problem. Two years back I replaced
canister and also pressure valve. It paased the emission at that time,
but with in months check engine light is still on. I alread spend about
$1000 so far on this. I have to re do my CA emission again... what are
the best options availabe to me.
TeGGeR® - 14 Mar 2006 07:00 GMT
> Hi,
>
[quoted text clipped - 3 lines]
> $1000 so far on this. I have to re do my CA emission again... what are
> the best options availabe to me.
What's the code, Kenneth?

Signature
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
gvkp - 21 Mar 2006 00:12 GMT
It is P1457 (Leak detected in EVAP control system).
> > Hi,
> >
[quoted text clipped - 11 lines]
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/
TeGGeR® - 21 Mar 2006 02:54 GMT
>> > Hi,
>> >
[quoted text clipped - 7 lines]
>
> It is P1457 (Leak detected in EVAP control system).
Uh, not quite...
1457 ties it down to the *canister* part of the evaporative system, as
opposed to the *tank* portion.
Three of these codes:
P1456 Evaporative Emissions (EVAP) Control System Leakage
(Fuel Tank System)
P1457 Evaporative Emissions (EVAP) Control System Leakage
(EVAP Canister System)
P1459 Evaporative Emission (EVAP) Purge Flow Switch Malfunction

Signature
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
'Curly Q. Links' - 21 Mar 2006 03:41 GMT
> Hi,
>
[quoted text clipped - 3 lines]
> $1000 so far on this. I have to re do my CA emission again... what are
> the best options availabe to me.
----------------------
If you've been in the habit of 'topping up' you might get that light
more often than you would like....
'Curly'