 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Honda Cars / May 20062002 crv dtc diagnostic trouble codes
how to read codes without a scan tool and need a list of all trouble codes > how to read codes without a scan tool Can't. Not any more. > and need a list of all trouble > codes A list will come with your scan tool. Others are available with any Internet search engine. I have a partial list here: http://www.tegger.com/hondafaq/error_codes.html Why do you need to know the codes? Did your MIL illuminate?  SignatureTeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ no but i seem to be using alot of petrol lately wanted to check to see if there r errors even though there is no light i had it scanned b4 and there were error codes even though there was no mil > no but i seem to be using alot of petrol lately wanted to check to see > if there r errors even though there is no light i had it scanned b4 > and there were error codes even though there was no mil I don't know how the UK's diag system works. North America's system encompasses certain situations where an error code will be logged, but the MIL won't turn on until the error occurs one more time ("two-trip logic"). You need to make note of what the error codes are. You have to look then up in a list to see what part of the system set the code. What did the codes say last time you had them read? SignatureTeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2010 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.