noisy suspension

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

reverend - 25 May 2006 02:01 GMT

I hava a 1997 civic coupe ex, i put some h&r springs with kyb shocks.
ever since ive been getting alot of noise from the back of the car.
mechanic told me the trailing arm bushings needed to be replaced, i
bought a pair of trailing arms, brand new from honda, but with the new
bushings i'm still getting all the squeeking and noise from the rear
when i go over bumbs and what not.

i've seen this problem posted before but havent found answer...

loosing paitience with car and dont want to sell
anybody know

Reply to this Message

TeGGeR® - 25 May 2006 02:56 GMT

> I hava a 1997 civic coupe ex, i put some h&r springs with kyb shocks.
> ever since ive been getting alot of noise from the back of the car.
[quoted text clipped - 7 lines]
> loosing paitience with car and dont want to sell
> anybody know

When the new springs were put on, was there a rubber donut that got left
off? Better check.

Were any of the rear bushings replaced with urethane ones?

OEM bushings don't squeak. Bring those new trailing arms back to the
dealer. You don't need them unless the ones on the car now are urethane.

Signature

TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Reply to this Message

reverend - 25 May 2006 03:02 GMT

i cant remember if there was a rubber donut, but i'm pretty sure that
its not on the car now. does that rubber donut go on the bottom of the
springs? i didnt change the bushings but rather the entire trailing arm.

Reply to this Message

TeGGeR® - 25 May 2006 03:59 GMT

> i cant remember if there was a rubber donut, but i'm pretty sure that
> its not on the car now. does that rubber donut go on the bottom of the
> springs?

Top, actually. It prevents...squeaks.

Signature

TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Reply to this Message