Hi,
I broke my driver's side tail light (Outer light) while parking. I
bought the OEM parts for replacement. However, I could not pull the
broken tail light out of the car. Any advice is appreciate it!
This is what I did.
(1) I unscrewed the 3 nuts
(2) I went undneath the bumper to unscrew the bolt holding the
taillight.
Thanks
ah1244@wayne.edu - 22 Jun 2006 18:31 GMT
According to the Helms manual, there should be a plastic (or metal?)
holder through which that screw (according to the figure it is a screw,
not a bolt) holds the tail light from below. On either side should be
two bolts. Try removing them, and taking off that plastic/metal clip
thing as well. The diagram in Helms manual indicates 3 bolts from
inside the trunk, and 1 screw and 2 bolts from below (between the
bumper and light).
Hope this helps.
> Hi,
>
[quoted text clipped - 9 lines]
>
> Thanks
'Curly Q. Links' - 23 Jun 2006 15:03 GMT
> Hi,
>
> I broke my driver's side tail light (Outer light) while parking. I
> bought the OEM parts for replacement. However, I could not pull the
> broken tail light out of the car. Any advice is appreciate it!
------------------------------
www.slhondaparts.com has the diagrams.
'Curly'