HELP - After breaking a timing belt - I discovered, extensive slack in
one of the exaust valves - My guess is it is bent as a few of you have
pointed out that it's an interference angine and very likey.
So it off with the head. Trouble is this has been bigger then Ben Hur,
I have managed to get the 6 bolts lossening the exaust manifold from the
head, but the manifold is held lower by other bolt and I can't move the
manifild any more than 1/2". So I try to get the guards of the exhaust
and loosten the other bold holding the manifild (to the block?) but the
radiator is in the way.
After dismantling the bumper, and removing the air conditioning radiator
(without letting the gas out) - I can't work out how to remove the
radiator.  
All this - so I can get at the bolts for the manifold - talk about
frustrating, but a least I'm learning.

I have both in & out manifild loose, the 10 head bold removed, and the
head is still very held on. What is the best way to shift the head from
the block ?? Have I got all the bolts I need released - certainly looks
like it.

Thanks Spike