1988 Honda Prelude slave cylinder(s)???????? HELP

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

cathyinmo - 10 Aug 2006 16:59 GMT

ok my fluid is leaking out of my holder. Took it to CarX (UGH) they said my
slave cylinder was leaking and my clutch cable. Spoke with another mechanic
he said he's done hundreds of slave repairs and not once was a clutch cable
bad. BTW CarX 432.00 (quote)..2nd guy...said 91.00 to replace the slave
cylinder ( I said I had the part) THEN talked to a 3rd guy...he sats there
are 2 slave cylinders, and if you replace one you should do the other, and
most likely the master cylinder too....HELP PLEASE

Reply to this Message

cathyinmo - 10 Aug 2006 21:09 GMT

well my mom came and took it to another shop, he said the slavecylinders
were fine it just needed the clutch hose (hydraulic???) even tho I can get
the part from honda...she letting him do it to the tune of 200.00 oh wait
that will include my inspection

thanx anyways

Reply to this Message

gfretwell@aol.com - 06 Feb 2008 20:46 GMT

>ok my fluid is leaking out of my holder. Took it to CarX (UGH) they said my
>slave cylinder was leaking and my clutch cable. Spoke with another mechanic
[quoted text clipped - 3 lines]
>are 2 slave cylinders, and if you replace one you should do the other, and
>most likely the master cylinder too....HELP PLEASE

The slave cylinder was bad on my 97, the part was $30 and took about
15 minutes to put in. Bleeding the system took longer than putting in
the part.

Reply to this Message