96 Accord speed signal

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

JanN - 15 Aug 2006 07:13 GMT

In my car, 1996 Accord (4 cyl 2.2l) I need to get access to the VSS signal
(for cruise control installation).
Where (in the engine bay) would be the best place to access this?
In my previous 1991 Accord it was an orange wire, and it was easily accessed
at a connector on the driver's side fender.

Regards,
Jan

Reply to this Message

JanN - 16 Aug 2006 06:53 GMT

Found out that the VSS is on pin #12 on the 14-pin connector located on the
driver's side fender,
near the windscreen (in the bracket attached to the FI resistor block).
Double checked by measuring
between the 3-pin connector at the VSS sensor and pin 12 on the 14-pin.
This will work great for hooking up my (aftermarket) cruise!

Regards,
Jan

> In my car, 1996 Accord (4 cyl 2.2l) I need to get access to the VSS signal
> (for cruise control installation).
[quoted text clipped - 5 lines]
> Regards,
> Jan

Reply to this Message