Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Honda Cars / May 2007

Tip: Looking for answers? Try searching our database.

rear window antenna problem

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Duck - 14 May 2007 17:01 GMT
The antenna (in the rear window) of my 2001 Accord has a heat related
problem. When the temp goes above appx. 60f and the car sits out in
the sun for a while, the radio will only pickup very close local
stations (i.e. strong signal). As the inside of the car cools down
either by driving with the windows down or the A/C on, reception will
gradually improve.

Any ideas on how to fix this?
jim beam - 15 May 2007 05:07 GMT
> The antenna (in the rear window) of my 2001 Accord has a heat related
> problem. When the temp goes above appx. 60f and the car sits out in
[quoted text clipped - 4 lines]
>
> Any ideas on how to fix this?

could be a loose connector - try that first.  otherwise, either replace
the glass or try and find the break in the copper print and repair it
with conductive paint.  could be tricky if the crack is so small as to
be bridged with temperature variation.  look for dry joints in other
connectors nearer the radio as well.
Eye In The Sky - 15 May 2007 12:14 GMT
>> The antenna (in the rear window) of my 2001 Accord has a heat related
>> problem. When the temp goes above appx. 60f and the car sits out in
[quoted text clipped - 10 lines]
> bridged with temperature variation.  look for dry joints in other
> connectors nearer the radio as well.

If all else fails, you could add an aftermarket antenna-- though that would
probably involve drilling a hole through the sheet metal to mount it.
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.