Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Honda Cars / May 2007

Tip: Looking for answers? Try searching our database.

CRX blower motor/resistor

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Meathead - 29 May 2007 12:46 GMT
88 CRX DX.  Heater fan blows fine on every speed but #1.  2 thru 4 are
fine.  To those who know:  Could this be the resistor? (I thought
resistors were an all-or-nothing affair leaving only the highest speed
upon failure.)  Or is it the switch?  Thanks.

Kevin
Tegger - 29 May 2007 12:56 GMT
Meathead <KevinLee33@comcast.net> wrote in news:1180439174.917970.152500
@q66g2000hsg.googlegroups.com:

> 88 CRX DX.  Heater fan blows fine on every speed but #1.  2 thru 4 are
> fine.  To those who know:  Could this be the resistor? (I thought
> resistors were an all-or-nothing affair leaving only the highest speed
> upon failure.)  Or is it the switch?  Thanks.
>
> Kevin

Which speeds remain depends on which resistor wires break. There is one
coil for each speed (the smaller the coil, the slower the motor runs).

The coil is behind the glove box. Have a peek. If a coil is broken, it will
be abundantly obvious.

Signature

Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Grumpy AuContraire - 29 May 2007 15:18 GMT
> Meathead <KevinLee33@comcast.net> wrote in news:1180439174.917970.152500
> @q66g2000hsg.googlegroups.com:
[quoted text clipped - 11 lines]
> The coil is behind the glove box. Have a peek. If a coil is broken, it will
> be abundantly obvious.

Would this apply to older Civics as well?  I noticed that both, the '82
& '83 low speed settings do not work.

JT
Tegger - 29 May 2007 16:54 GMT
>> Meathead <KevinLee33@comcast.net> wrote in
>> news:1180439174.917970.152500 @q66g2000hsg.googlegroups.com:
[quoted text clipped - 14 lines]
>
> Would this apply to older Civics as well?

Yep.

>  I noticed that both, the
> '82 & '83 low speed settings do not work.

Have a look at it. Bet the coils are broken. They rust out.

Signature

Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Grumpy AuContraire - 29 May 2007 23:45 GMT
>>>Meathead <KevinLee33@comcast.net> wrote in
>>>news:1180439174.917970.152500 @q66g2000hsg.googlegroups.com:
[quoted text clipped - 21 lines]
>
> Have a look at it. Bet the coils are broken. They rust out.

Also, the lowest speed would suffer the most stress.  The blower motor
swithch on my old '55 Studebaker works the same way. They get quite warm.

JT
motsco_ - 29 May 2007 16:52 GMT
Tegger wrote:>
> Which speeds remain depends on which resistor wires break. There is one
> coil for each speed (the smaller the coil, the slower the motor runs).

----------------------

 I think the largest coil has the highest resistance, and therefore its
for the lowest speed, no?

'Curly'
Tegger - 29 May 2007 18:02 GMT
motsco_ <motsco_@interbaun.com> wrote in news:135oj3gftougb53
@corp.supernews.com:

> Tegger wrote:>
>> Which speeds remain depends on which resistor wires break. There is one
[quoted text clipped - 6 lines]
>
> 'Curly'

The smaller coils have the highest resistance.

The smallest coils control the slow speeds. The smallest coils rust out and
break first. For this reason you lose the lowest speeds first.

Signature

Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

jim beam - 30 May 2007 05:46 GMT
> motsco_ <motsco_@interbaun.com> wrote in news:135oj3gftougb53
> @corp.supernews.com:
[quoted text clipped - 11 lines]
>
> The smaller coils have the highest resistance.

correct.

> The smallest coils control the slow speeds. The smallest coils rust out and
> break first. For this reason you lose the lowest speeds first.

indeed.
Meathead - 30 May 2007 11:57 GMT
Winnah winnah chicken dinnah!  Yep.  It was the resistor alright.  In
and out in 2 minutes flat!  Man I love old cars.  $25 at O'Reilly
shipped in on the late afternoon truck.  In hand by 5pm.  And yes I
can definitely say the small coil has the highest resistance and
controls the lowest fan speed as the #1 speed on my CRX was out.

Kevin (majoring in  Epoxy-based Automotive Reconstruction)
jim beam - 29 May 2007 13:54 GMT
> 88 CRX DX.  Heater fan blows fine on every speed but #1.  2 thru 4 are
> fine.  To those who know:  Could this be the resistor? (I thought
> resistors were an all-or-nothing affair leaving only the highest speed
> upon failure.)

yes, resistor.  replace and all will be well.

>  Or is it the switch?

unlikely.

>  Thanks.
>
> Kevin
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.