Hard to get off Spark Plug Boots
If you ever have a spark plug boot that is hard to get off one way
that has worked good for me is to take a 2-3 foot 3/16 brake line and
screw it into a air nozzle and then file the end of the line to look
like a hypo needle and then insert it between the boot and wire and
give it a short blast of air. It will balloon out and then you can
pull it right off, once in a while if they are still stuck I will
spray a little brake clean in between the boot and wire and they slide
right off.
------
JustAutoParts - a place to find automotive parts and technical advice.
http://www.JustAutoParts.ca // http://justautoparts.googlepages.com/index.html
http://justautoparts.googlepages.com/AutoPartsWay.html
Pangloss - 08 May 2008 20:58 GMT
> Hard to get off Spark Plug Boots
> If you ever have a spark plug boot that is hard to get off one way
[quoted text clipped - 6 lines]
> right off.
> ------
Sounds like a recipe to create all kinds of problems down the road....
Tegger - 09 May 2008 01:38 GMT
> Hard to get off
If you're finding it hard to get off, you're rubbing it the wrong way.

Signature
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
Polfus - 09 May 2008 06:16 GMT
>> Hard to get off
>
> If you're finding it hard to get off, you're rubbing it the wrong way.
Heh..that made me laugh outloud.
Peace,
Polfus
Tony Harding - 14 May 2008 14:12 GMT
>> Hard to get off
>
> If you're finding it hard to get off, you're rubbing it the wrong way.
LOL :)
<rimshot>