This is a 2000 Accord 3.0 V6 and I can't figure out how to remove the
tensioner to replace the idler pully. I barely got the old pully off because
there's not enough room for the bolt to come out all the way (hits the
body/frame) so I have to remove the whole tensioner assembly somehow. Here's
a pic of the assembly and it looks like there is only 2 bolts holding it on
but, there's something else because it won't budge. I even tried to rotate
it to see if it clocked into some sort of keyway or something.  Thanks for
any help.

http://s140.photobucket.com/albums/r13/jweb47/Accord/?action=view&current=01.jpg