Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Honda Cars / March 2008

Tip: Looking for answers? Try searching our database.

New Honda Accord too wide, cannot get into garage safely.

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Frank - 26 Feb 2008 02:34 GMT
Too tight to drive into single wide garage door, about 1/2" clear on each
side and mirrors don't fold back. I guess with practice you could get in and
out of the garage but for now it has to be parked on the street. If Honda
make the car wider, the mirrors should fold back. Dang!

We also have an old Acura Integra that fits into the same garage nicely,
with or without folding the mirrors. Wife has a Camry without folding
mirrors that fits into this garage as well. My small Nissan truck fits as
well with the mirrors folded.

Are there folding mirror conversion kits for the Accord?
Jeff - 26 Feb 2008 02:38 GMT
> Too tight to drive into single wide garage door, about 1/2" clear on each
> side and mirrors don't fold back. I guess with practice you could get in and
[quoted text clipped - 7 lines]
>
> Are there folding mirror conversion kits for the Accord?

What you need to do is put in small rubber doors in the side of the
garage door (like sideways doggie doors), so that if you hit the sides,
it goes right through without damage!

Or get a new house.

Jeff
Frank - 26 Feb 2008 02:39 GMT
Sorry, that should be Civic Si, not Accord. Son's new car, not mine.
Gordon McGrew - 26 Feb 2008 03:40 GMT
>Sorry, that should be Civic Si, not Accord. Son's new car, not mine.

The garage is so narrow you can't get a Civic in it???  Either the
garage is a joke or this upsizing thing has really gotten out of hand.
Joe - 28 Feb 2008 01:22 GMT
>>Sorry, that should be Civic Si, not Accord. Son's new car, not mine.
>
> The garage is so narrow you can't get a Civic in it???  Either the
> garage is a joke or this upsizing thing has really gotten out of hand.

The new civics are certainly larger than the older ones, but not so
much that they shouldn't fit into a garage.  

Signature

Joe - Linux User #449481/Ubuntu User #19733
joe at hits - buffalo dot com
"Hate is baggage, life is too short to go around pissed off all the
time..." - Danny, American History X

John Grossbohlin - 28 Feb 2008 01:16 GMT
| Sorry, that should be Civic Si, not Accord. Son's new car, not mine.

Do they have different mirrors on the Si than on the other Civics such as
the LX? In the photos on the Honda site they look like the same mirrors. My
2008 LX has folding mirrors...

John
Frank - 28 Feb 2008 03:06 GMT
> | Sorry, that should be Civic Si, not Accord. Son's new car, not mine.
>
[quoted text clipped - 4 lines]
>
> John

Don't think so, the Si has the soup up engine and sports suspension and
tires.
Tegger - 26 Feb 2008 04:20 GMT
> Too tight to drive into single wide garage door, about 1/2" clear on
> each side and mirrors don't fold back. I guess with practice you could
[quoted text clipped - 8 lines]
>
> Are there folding mirror conversion kits for the Accord?

This must be a newer house. Older houses were built for full-size American
cars, which were wider than your Accord.

Some markets legally require folding mirrors. You may be able to locate a
set at a European Honda dealer (England, maybe?). Be prepared for serious
sticker shock!

Signature

Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Jeff - 26 Feb 2008 04:36 GMT
>> Too tight to drive into single wide garage door, about 1/2" clear on
>> each side and mirrors don't fold back. I guess with practice you could
[quoted text clipped - 15 lines]
> set at a European Honda dealer (England, maybe?). Be prepared for serious
> sticker shock!

But the doors might be designed differently or there may be other
differences that would make it so that the parts are not interchangeable.

The cars are built in different palnts, perhap to different specs.

Jeff
Tegger - 26 Feb 2008 10:37 GMT
>>> Too tight to drive into single wide garage door, about 1/2" clear on
>>> each side and mirrors don't fold back. I guess with practice you
[quoted text clipped - 21 lines]
>
> The cars are built in different palnts, perhap to different specs.

That's perfectly true. Replacement could be a minefield. Eupropean Accords
are smaller than ours. The Acura TSX is based on the European Accord, but
even then...

Signature

Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Frank - 26 Feb 2008 16:30 GMT
> This must be a newer house. Older houses were built for full-size American
> cars, which were wider than your Accord.

Its an old house, built around 1910 - Model T, horse and carriage width, I
suppose.
Jeff - 26 Feb 2008 21:47 GMT
>> This must be a newer house. Older houses were built for full-size American
>> cars, which were wider than your Accord.
>
> Its an old house, built around 1910 - Model T, horse and carriage width, I
> suppose.

The model T was introduced in 1908. In 1910, there were only 12,000
produced. My guess the garage was not originally intended to house a car
or truck.

Either way, increasing the width of the garage door may increase the
value of the house.

Jeff
Brian Smith - 26 Feb 2008 08:43 GMT
> Too tight to drive into single wide garage door, about 1/2" clear on each
> side and mirrors don't fold back. I guess with practice you could get in
[quoted text clipped - 7 lines]
>
> Are there folding mirror conversion kits for the Accord?

   Renovate the garage. Replace the existing doorway with a larger doorway.
Frank - 26 Feb 2008 16:26 GMT
>> Too tight to drive into single wide garage door, about 1/2" clear on each
>> side and mirrors don't fold back. I guess with practice you could get in
[quoted text clipped - 10 lines]
>    Renovate the garage. Replace the existing doorway with a larger
> doorway.

I'm thinking about it. On one side of the door is a structural wall holding
up three floors above, on the other side of the door is a partial wall with
multiple gas meters mounted on it. Moving either of the walls to allow
additional clearance will be an expense. Further, the entry way, the same
width as the door,  has full size brick fascia - it could cut that with a
wet saw which will give an additional 1" clearance on each side. But the
door opening is the problem. Maybe cheaper to get a smaller car or one with
foldable mirrors.
Grumpy AuContraire - 26 Feb 2008 16:44 GMT
>>>Too tight to drive into single wide garage door, about 1/2" clear on each
>>>side and mirrors don't fold back. I guess with practice you could get in
[quoted text clipped - 19 lines]
> door opening is the problem. Maybe cheaper to get a smaller car or one with
> foldable mirrors.

You said that it was the kid's car...  Let him figgerout whattadoo..

JT
Dana - 29 Feb 2008 05:23 GMT
> Too tight to drive into single wide garage door, about 1/2" clear on each
> side and mirrors don't fold back. I guess with practice you could get in
[quoted text clipped - 7 lines]
>
> Are there folding mirror conversion kits for the Accord?

Shouldn't need folding anything , opening should be a standard 7 feet . To
the best of my knowledge ,that's the standard size`garage door . You should
have more then 1/2'' clearance on each side , should be no problems getting
in or out of the garage with that vehicle .
Joe - 29 Feb 2008 06:01 GMT
> Shouldn't need folding anything , opening should be a standard 7 feet . To
> the best of my knowledge ,that's the standard size`garage door . You should
> have more then 1/2'' clearance on each side , should be no problems getting
> in or out of the garage with that vehicle .

Standards change.  His house is old.  Hell, when his garage was built,
there were few to no cars on the road.  A 7' "standard" today is
meaningless to him.

My house has a damned 34" entry door.  That's not "standard" today,
either, but it doesn't change the fact that it's there and needs to be
dealt with...

Signature

Joe - Linux User #449481/Ubuntu User #19733
joe at hits - buffalo dot com
"Hate is baggage, life is too short to go around pissed off all the
time..." - Danny, American History X

Al - 29 Feb 2008 11:52 GMT
> Standards change.  His house is old.  Hell, when his garage was built,
> there were few to no cars on the road.  A 7' "standard" today is
> meaningless to him.

Yo -  Mr. OP  - please state the exact measurement of your garage opening.
Frank - 01 Mar 2008 02:53 GMT
>> Standards change.  His house is old.  Hell, when his garage was built,
>> there were few to no cars on the road.  A 7' "standard" today is
>> meaningless to him.
>
> Yo -  Mr. OP  - please state the exact measurement of your garage opening.

Yo Al, the house is 1.5 hours away so I won't be able to measure it right
away. FYI, the width is about the width of the 2007 Civic plus about 1"
clear on each side of the mirrors. I'll post the exact measurements when I
have a chance to get out there.

Its in San Francisco and the garage opening is pretty typical for buildings
of that period around the neighborhood. I see people pull in their vans in
the garage but the newer Civics must be wider than I expected.

Friend of mine was going to buy a multi million dollar house but he changed
his mind when he found out he couldn't get into the garage without folding
the mirrors.
Frank - 05 Mar 2008 05:20 GMT
>> Standards change.  His house is old.  Hell, when his garage was built,
>> there were few to no cars on the road.  A 7' "standard" today is
>> meaningless to him.
>
> Yo -  Mr. OP  - please state the exact measurement of your garage opening.

7' 2"
Dana - 29 Feb 2008 13:52 GMT
>> Shouldn't need folding anything , opening should be a standard 7 feet .
>> To
[quoted text clipped - 11 lines]
> either, but it doesn't change the fact that it's there and needs to be
> dealt with...

Missed the post where he said it was a 1910 house
Gordon McGrew - 02 Mar 2008 03:55 GMT
>>> Shouldn't need folding anything , opening should be a standard 7 feet .
>>> To
[quoted text clipped - 13 lines]
>
>Missed the post where he said it was a 1910 house

I have a 1920 house with a 1925 garage sized for a Model T.  Not very
wide or very deep. but plenty of height.  A G1 Odyssey fits OK.

Rate this thread:






 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.