> Hi Jim,
>
[quoted text clipped - 5 lines]
> called around and found this garage that charges a little less. They
> are the mechanic division of a well known body shop in my area.
ok, but this should not cause burning rubber smell.
my thoughts are that tegger is probably correct, a slipping accessory
belt can indeed be the cause of this smell. but i'm still suspicious of
the necessity of the work you had done because if it was not done right,
given that one of the driveshaft boots is near the exhaust, a driveshaft
may not be seated correctly and be touching and burning.
my caution is because the outer driveshaft boots do indeed crack, but
the inner ones hardly ever. in fact, i have 18 year old oem driveshafts
in my crx, and while the outer boots have been changed, the inner ones
are still great, and there is no reason to compromise them unless
they're broken in some way. they don't have to flex much in use so they
don't crack the same way as the outer joint boots. they never get
exposed to the sun either. for a shop to recommend the inner boots as
well as the outer is mostly inexpert job creation.
> Thanks,
> Faith
>
>> what kind of boots? �driveshaft? �steering rack? �suspension joint?
>> spark plug? �more importantly, what kind of mechanic and what was the
>> problem?
faith20879@yahoo.com - 09 Apr 2008 15:32 GMT
Hi all,
This is an update. BTW, I learned the boots are for the CV joint. I
could see them under from bending over the engine. Sorry about the
wrong info I gave out earlier.
I took the car back to the shop Monday morning. The guy apologized
profusely and promised to get it right. By the evening, after he put
in a new set of boots, tightened up whatever were loose before, gave
me a free oil change, and took it for a road test, he declared the car
was now problem-free.
On the way home the car was fine. But Tuesday the rubber burning
smell returned, though not as strong. I first smelled it through the
vent when stopped at the traffic light. I thought maybe it was the
residual but it persisted after 50 miles and 24 hours.
I took it back to the shop again this morning. The guy again
apologized profusely and said he couldn't think of what to say except
to take another look.
I left the car there but I have no confidence on this guy now. What
would you do?
Any opinion will be greatly appreciated!
Faith
motsco_ - 09 Apr 2008 23:00 GMT
> Hi all,
>
[quoted text clipped - 23 lines]
>
> Faith
-----------------------
Most Hondas will dribble a bit of oil on the exhaust pipe when the oil
filter is removed / replaced. You should LOOK to see if you can tell
where the smoke /smell is coming from.
The more times you give it to him, the more chances he has of really
messing something up.
'Curly'
Tegger - 10 Apr 2008 03:30 GMT
faith20879@yahoo.com wrote in news:e2a9316e-29bf-40f1-b253-
50e7cab4e86a@a1g2000hsb.googlegroups.com:
> Hi all,
>
[quoted text clipped - 21 lines]
>
> Any opinion will be greatly appreciated!
Did he check the accessory drive belts to see if they were slipping? Did he
check any of the pulleys/idler wheels to see if they were seizing up? Those
two are common sources of rubber burning smells.

Signature
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/