Security TORX style to remvoe the cover on 2001 Acura TL

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

ndccpf1 - 19 Feb 2009 23:51 GMT

I have secure TORX (hole in middle) but none seem to fit the TORX
screw to remove the HID lamp cover. Maybe I don't have the right size ?

Reply to this Message

Dan C - 20 Feb 2009 01:37 GMT

> I have secure TORX (hole in middle) but none seem to fit the TORX screw
> to remove the HID lamp cover. Maybe I don't have the right size ?

Yeah, that's a pretty good bet.

<boggle>

Signature

"Ubuntu" -- an African word, meaning "Slackware is too hard for me".
The Usenet Improvement Project: http://improve-usenet.org
Ahhhhhhh!: http://brandybuck.site40.net/pics/relieve.jpg

Reply to this Message

ndccpf1 - 20 Feb 2009 12:25 GMT

> > I have secure TORX (hole in middle) but none seem to fit the TORX screw
> > to remove the HID lamp cover. Maybe I don't have the right size ?
[quoted text clipped - 7 lines]
> The Usenet Improvement Project:http://improve-usenet.org
> Ahhhhhhh!: http://brandybuck.site40.net/pics/relieve.jpg

It's item number 2 in this view==>
http://www.acuraautomotiveparts.org/acura/jsp/mws/prddisplay.jsp?inputstate=5&ca
tcgry1=TL&catcgry2=2003&catcgry3=4DR+TYPE-S&catcgry4=KA5AT&catcgry5=HEADLIGHT+(+
02-03)&ListAll=All&vinsrch=no&systemcomp=&vinnoT=&trim=&trans=&view=normal

Reply to this Message

ndccpf1 - 22 Feb 2009 13:17 GMT

Secure Torx T-20

Reply to this Message

Michael Pardee - 22 Feb 2009 15:32 GMT

> Secure Torx T-20

Good to know - thanks! Was that missing from the secure Torx set you had?

Mike

Reply to this Message

ndccpf1 - 24 Feb 2009 11:30 GMT

> Good to know - thanks! Was that missing from the secure Torx set you had?
>
> Mike

No I actually found it in my tool kit. I will try again tomorrow
afternoon and post my results :)

Reply to this Message