99' Civic OEM Stereo Replacing

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Sam Cormier - 02 Nov 2004 03:42 GMT

Guys I want to replace my 2 unit stereo (radio & single cd)
I'm going to need a pocket to fill in the empty spot below.

Is this all I need or is there more hardware required?

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5728989329

Thanks,
Sam

Reply to this Message

Jamco - 03 Nov 2004 00:58 GMT

you'll probably need the full mounting kit, that goes around the deck, and
that pocket that goes below the deck. Usually the mounting kit comes with
the pocket. I bought mine for $20 candian. You may also want to get a
wiring harnest. That way you can just plug your wires into it, then into
your deck, instead of cutting off the current wires.
Good luck

> Guys I want to replace my 2 unit stereo (radio & single cd)
> I'm going to need a pocket to fill in the empty spot below.
[quoted text clipped - 5 lines]
> Thanks,
> Sam

Reply to this Message

Sam Cormier - 04 Nov 2004 03:08 GMT

I'm also in Canada
Where'd you pick up that kit?

Do you think a place like Futureshop would have the parts
that I need (pocket) and do the whole install even?

Thanks,
Sam

> you'll probably need the full mounting kit, that goes around the deck, and
> that pocket that goes below the deck. Usually the mounting kit comes with
[quoted text clipped - 12 lines]
>> Thanks,
>> Sam

Reply to this Message

Jamco - 08 Nov 2004 21:48 GMT

I went to futureshop, and they had the kit, and would install it with the
deck, but they won't sell me the kit so I could do it on my own. I ended up
finding the kit for my car at a&b sound.

good luck

> I'm also in Canada
> Where'd you pick up that kit?
[quoted text clipped - 21 lines]
>>> Thanks,
>>> Sam

Reply to this Message