Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Honda Cars / August 2005

Tip: Looking for answers? Try searching our database.

Oil Leak

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Jonathan Upright - 08 Aug 2005 01:49 GMT
My wife has a 1986 Acura Legend.  The oil seal around the pan has gone
bad, and it's leaking quite a bit.  I have never had this problem with a
car of mine before, so is changing/replacing the gasket around the oil
pan something that a "regular person" can do, or are there special steps
or meticulous procedures that are more suited for a properly trained and
experienced mechanic?

Thanx,

Jonathan
jim beam - 08 Aug 2005 02:32 GMT
> My wife has a 1986 Acura Legend.  The oil seal around the pan has gone
> bad, and it's leaking quite a bit.  I have never had this problem with a
[quoted text clipped - 6 lines]
>
> Jonathan

first things first - try tightening the bolts that hold it in place
first.  don't over-tighten.  also, check it's the pan gasket, not the seal.

if you do need to change, you may need to buy the seals for the exhaust
pipe - may beed to drop it to get the pan off.

also to consider: what oil are you using?  when i ran motorcraft, mine
leaked like mad.  running castrol, hardly at all.
Jonathan Upright - 09 Aug 2005 03:22 GMT
>> My wife has a 1986 Acura Legend.  The oil seal around the pan has gone
>> bad, and it's leaking quite a bit.  I have never had this problem with
[quoted text clipped - 15 lines]
> also to consider: what oil are you using?  when i ran motorcraft, mine
> leaked like mad.  running castrol, hardly at all.

I will also say this:  When I was under the car last time, I noticed an
orange caulk-type substance that was lining the perimeter of the oil
pan, but wasn't preventing any leaks whatsoever.

Pardon my ignorance, but what is the difference between the gasket and
the seal?  In the meantime, I will check the bolts' tightness and get
back to you.

Thanx!

Jonathan
jim beam - 09 Aug 2005 03:54 GMT
>>> My wife has a 1986 Acura Legend.  The oil seal around the pan has
>>> gone bad, and it's leaking quite a bit.  I have never had this
[quoted text clipped - 20 lines]
> orange caulk-type substance that was lining the perimeter of the oil
> pan, but wasn't preventing any leaks whatsoever.

that orange stuff indicates that someone's had the oil pan off before -
afaik, it's never used with honda oem assembly.  a new pan gasket should
fix it just fine.

> Pardon my ignorance, but what is the difference between the gasket and
> the seal?

the seals are the round things on either end of the crankshaft.  can't
see them usually, but if they're leaking, oil runs down and tends to
accumulate around either end of the pan.  suggest cleaning off the pan
with de-greaser, getting it nice & dry, then watching where the new oil
emerges.

fyi, oils are colored to allow leak identification.  automatic
transmission is red, engine is straw.

>  In the meantime, I will check the bolts' tightness and get
> back to you.
>
> Thanx!
>
> Jonathan
Jonathan Upright - 11 Aug 2005 00:58 GMT
>>>> My wife has a 1986 Acura Legend.  The oil seal around the pan has
>>>> gone bad, and it's leaking quite a bit.  I have never had this
[quoted text clipped - 36 lines]
> fyi, oils are colored to allow leak identification.  automatic
> transmission is red, engine is straw.

Well, this car is a 5-speed manual, so I know it's not transmission
fluid.  There is a drop of oil "clinging" to the drain plug of the oil
pan after each run, but it's not leaking there.  You can see the
"streaks" from the front side of the pan.

>>  In the meantime, I will check the bolts' tightness and get back to you.

Which I haven't done yet, but plan to do soon.  ;-)

>> Thanx!
>>
>> Jonathan
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.