DIY: Installing a Deck Lid Spoiler on a 2006 Accord Sedan

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

G-Man - 21 Nov 2005 03:18 GMT

If anyone is interested:

http://gwfweb.com/honda/06accord/06splr.htm

G-Man

Reply to this Message

LBJGH - 22 Nov 2005 01:42 GMT

Nice DYI... too bad Newmarket Honda didn't have your instructions... they
didn't even paint the bare metal after drilling the holes in my 04 accord.

I had to take the car back into 'em to remove the spoiler paint the holes...
and they ended up getting paint on my back window... to boot they left the
adhesive strips hanging out from under the rear spoiler. ... real shoe
makers!

O

> If anyone is interested:
>
> http://gwfweb.com/honda/06accord/06splr.htm
>
> G-Man

Reply to this Message

G-Man - 22 Nov 2005 03:43 GMT

Same thing on my '01. I had to raise the wing spoiler a while back because
the gasket was coming out, and the holes are all rusted to hell.

If you want it done right....

G-Man

> Nice DYI... too bad Newmarket Honda didn't have your instructions... they
> didn't even paint the bare metal after drilling the holes in my 04 accord.
[quoted text clipped - 12 lines]
>>
>> G-Man

Reply to this Message

LBJGH - 22 Nov 2005 06:17 GMT

So true, I have two rattles I want to get fixed but I'm afraid the local
dealer will screw up my car worse than it is.

One is with my headliner in the area of the sunglasses holder... I stuffed
some shop cloths between the roof the headliner which works OK but not 100%
and the other is the drivers door/window but I don't have the nerve to pull
the door panel...

I wish there were some trustworthy shops in my area...

On a side note can Acura service Hondas?

> If you want it done right....
>
[quoted text clipped - 16 lines]
>>>
>>> G-Man

Reply to this Message

G-Man - 22 Nov 2005 15:23 GMT

> On a side note can Acura service Hondas?

My Honda dealer will service Acura...but states right up front that they do
not STOCK parts.

G-Man

Reply to this Message