Have you pulled both axles?  In addition, are you using a tilt bar?  You can
see several examples here http://tinyurl.com/p9s2s.  While I haven't pulled
a motor on a '94 'Lude, other Honda motors I've pulled require you to use a
tilt bar to angle the engine rather steeply before it will come out.

Eric

i have removed the axels but i still have trouble with clearence because i cant get the block past the transmission becauseof the flyweel and pressure plate ect. and i cant remove the pullies because i cant get them of i even tried to remove it stright throw the bottom but i cant go any further down because of the engine mount and i cant take it of with out removing the pully because it is behind that stupid cover do you have any other suggestions that i might be able to try

--
Ludedude94

thanks for all the help i finally got it out after droping the trany down with the block but yet again i have run into another problem now thankfuly it is not something big but i now currenly putting it all back together and i need all the torque specs for the main baring caps and for the connecting rods i was hoping there was a web sit that has them if you can find a good site that would be great thanks again for all the hel

--
Ludedude94

it sounds like a good idea to get the manual but if you know a good web site for the torque specs the engine is H23A1 SI 2.3 non V-tech but i will try to find that manua

--
Ludedude94