1998 Honda CRV LX clock

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

damn - 22 May 2006 02:14 GMT

Hi All,
Does anyone know how to remove the clock on a 1998 CRV. The clock
keeps good time but the display light is intermitent. I need to get
the clock out so I can fix the loose wiring. TIA.

Reply to this Message

'Curly Q. Links' - 22 May 2006 06:09 GMT

> Hi All,
> Does anyone know how to remove the clock on a 1998 CRV. The clock
> keeps good time but the display light is intermitent. I need to get
> the clock out so I can fix the loose wiring. TIA.

--------------------------------

Might be a cold solder joint or some corrosion in the connector. You pry
the whole dual air vent / clock assy out from the bottom using a flat
putty knife wrapped in electrical or shipping tape. Once the bottom
starts to come free it all pulls straight out. It doesn't have a
removable bulb, unlike the Civic / Accord in this TSB:
http://www.tegger.com/hondafaq/tsb/accord/x01-097e.pdf

'Curly'

Reply to this Message

damn - 22 May 2006 16:37 GMT

Thank you Curly, knew I could count on you sir.

>> Hi All,
>> Does anyone know how to remove the clock on a 1998 CRV. The clock
[quoted text clipped - 11 lines]
>
>'Curly'

Reply to this Message