Recently one of the low beams on my 2003 Accord LX sedan went out. I
went down to the autoparts store and picked up a twin pack of Sylvania
9006's, according to the little book they got there. Problem is that
they don't fit. The hang-up seems to be that the bulb has one little
groove on the one side but the connector has two little tabs instead of
one. (I may have it reversed, but either way # tabs != # grooves).
Other than that the bulbs look pretty much the same. Anyone else run
into this?
> Recently one of the low beams on my 2003 Accord LX sedan went out. I
> went down to the autoparts store and picked up a twin pack of Sylvania
[quoted text clipped - 4 lines]
> Other than that the bulbs look pretty much the same. Anyone else run
> into this?
there's the 9005's and 9006's for high & low beams respectively. sounds
like there's a mix-up between the two. check one of the online parts
sources to get a visual i.d.
http://catalog.eautopartscatalog.com/ipb/wizard.jsp?partner=ipb&clientid=alleura
sianautoparts&baseurl=http://www.alleurasianautoparts.com/&cookieid=1TK0JJXZU1TK
0JJXZT&year=2003&make=HO&model=ACC-LX4-005&category=P&part=Headlight+Bulb
bcattwood@gmail.com - 07 Jun 2006 18:18 GMT
> > Recently one of the low beams on my 2003 Accord LX sedan went out. I
> > went down to the autoparts store and picked up a twin pack of Sylvania
[quoted text clipped - 8 lines]
> like there's a mix-up between the two. check one of the online parts
> sources to get a visual i.d.
Ooops... it appears that maybe I didn't look close enough and actually
pulled the high beam bulb out of the car instead of the low beam.
Guess that would explain why the filament on the old one still looked
good, too. I think infant induced sleep deprivation must have dulled
my spatial skills.
Thanks for the link. Those pictures were much clearer than what I had
found.