1994 Civic Manual

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Mike Doyle - 17 Jun 2006 19:43 GMT

Does anyone have a paper manual?

If so, please check the front seat bolt sizes on page 20-60, & post
what size is shown.

My 92 paper manual shows 1 - 10mm & 3 - 8mm bolts.
Page 20-61 at :
http://media.honda.co.uk/car/owner/media/manuals/CivicManual/
shows 10mm bolts.

My 94 VX has 12mm bolts, as I just found out.

I've been looking for a 94 manual with no luck.

Reply to this Message

Elle - 17 Jun 2006 20:23 GMT

You realize that what the manual gives for bolt sizes is the
nominal diameter at the threads, not the size of the socket
that fits the bolt head, right?

The following site is for a 94 Civic VX and shows all the
front seat bolts to be 8 mm and 10 mm ones:

http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&cat
cgry1=Civic&catcgry2=1994&catcgry3=3DR+VX&catcgry4=KA5MT&catcgry5=FRONT+SEAT+COM
PONENTS

> Does anyone have a paper manual?
>
[quoted text clipped - 10 lines]
>
> I've been looking for a 94 manual with no luck.

Reply to this Message

Eric - 17 Jun 2006 21:57 GMT

> You realize that what the manual gives for bolt sizes is the
> nominal diameter at the threads, not the size of the socket
[quoted text clipped - 4 lines]
>
> http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&cat
cgry1=Civic&catcgry2=1994&catcgry3=3DR+VX&catcgry4=KA5MT&catcgry5=FRONT+SEAT+COM
PONENTS

On a Honda, 8 mm bolts will typically have 12 mm heads while the 10 mm bolts
will typically have 14 mm heads.

Eric

Reply to this Message

Mike Doyle - 17 Jun 2006 23:36 GMT

>> You realize that what the manual gives for bolt sizes is the
>> nominal diameter at the threads, not the size of the socket
[quoted text clipped - 9 lines]
>
> Eric

Thank you both! I was taking it as head size.

Reply to this Message