I have a 2001 civic ex coupe. Both of my low beams just went out.
The high beam works fine. All fuses have been checked and there all
good. When I switch to turn on my low beams I here a clicking noise
under the hood. I had antoher h4 bulb and I tried it to see if it
would work and its the same thing. Is it possible for both lights to
be bad or is it some wiring issue? I need to get this fixed asap.

Signature
Posted at author's request, using http://www.AutoBoardz.com interface
Articles individually verified to usenet standards. Visit URL to contact author/report abuse
Thread archive: http://www.AutoBoardz.com/high-beam-works-low-beam-doesnt-Honda-ftopict204634.html
Skyhawk - 27 Jan 2007 16:42 GMT
My Insight had the same problem. Turned out to be a bad pin at the switch
in the steering column. There was a recall on it !!!!!! Check with your
dealer. It cost $300 for diagnostic time to find the problem before they
knew about the pin recall! They did such a terrible job I got my money
back, but that's another story.
Good luck...
laxman - 28 Jan 2007 04:25 GMT
I am experiencing the very same problem right now, any solution to
this problem?
> I have a 2001 civic ex coupe. Both of my low beams just went
> out. The high beam works fine. All fuses have been checked
[quoted text clipped - 3 lines]
> Is it possible for both lights to be bad or is it some wiring
> issue? I need to get this fixed asap.
thorpey - 28 Jan 2007 22:25 GMT
>I have a 2001 civic ex coupe. Both of my low beams just went out.
>The high beam works fine. All fuses have been checked and there all
[quoted text clipped - 3 lines]
>to be bad or is it some wiring issue? I need to get
>this fixed asap.
Just had the same thing on my CR-V and both bulbs had gone u/s, mind
you if there is a clicking noise, there could be a chance a relay has
packed up.
rammy121 - 02 Mar 2007 11:55 GMT
i had the same problem with a horrid volvo 340 (YUKK!!!). turned out
to be the relay too.
rammy (u.k.)
> >I have a 2001 civic ex coupe. Both of my low beams just went out.
> >The high beam works fine. All fuses have been checked and there all
[quoted text clipped - 7 lines]
> you if there is a clicking noise, there could be a chance a relay has
> packed up.