90 Civic driver's door tensioner? pusher?

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

dex3703 - 24 Feb 2007 16:24 GMT

I'm going through and trying to fix all the current annoying problems
with my 90 Civic. The driver's door has a problem in that the extender/
pusher/tensioner thing, that keeps the door open, has been broken for
a long time. This is the thing that comes out of the front jamb and
pushes out on the door--a thin rod with a pin in it. The car side,
inside the front of the car, flops around and creaks, and the door
isn't under any tension.

What is this thing called? How do I fix it?

Thanks in advance,
Derek
Seattle

Reply to this Message

jim beam - 24 Feb 2007 16:31 GMT

> I'm going through and trying to fix all the current annoying problems
> with my 90 Civic. The driver's door has a problem in that the extender/
[quoted text clipped - 9 lines]
> Derek
> Seattle

if it's the anchor point inside the frame, you can't practically or
safely fix it. the anchor is inside the door column which is spot
welded together. to disassemble the column is impractical. to cut away
sufficient to allow you to re-weld the anchor would compromise safety.
bottom line, yes, it's annoying but it ain't gonna kill ya and only
you'll ever know about it.

Reply to this Message

Tegger - 26 Feb 2007 13:06 GMT

"dex3703" <dex3703@gmail.com> wrote in news:1172334297.201025.78790
@j27g2000cwj.googlegroups.com:

> I'm going through and trying to fix all the current annoying problems
> with my 90 Civic. The driver's door has a problem in that the extender/
[quoted text clipped - 5 lines]
>
> What is this thing called? How do I fix it?

It's the door check strap, its pin and its bracket.

Take the car to somebody with a MIG welder. Most auto garages have one..

Pull the door open so the check strap's bracket is up against the door
pillar and hold it there by pulling the door open.

With a grinder, take off some of the paint in that area.

Drop a blob or two of MIG weld to tack the strap bracket to the pillar's
outside face. No problem.

Signature

Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Reply to this Message

Rate this thread: