> Just search this NG for 'catalytic converter'.
>
> The heat shield rusts and then buzzes at certain RPM. You can remove it
> and bend it and put it back on or wrap a huge plumbing clamp around it.
>> Just search this NG for 'catalytic converter'.
>>
[quoted text clipped - 4 lines]
> Thanks I'll look into that. I also was reading Tegger's FAQ and found
> the bit about the a-pipe rattle, so maybe that's it.
Not likely on a car that new.
jim is right; the heat shields rust loose with the regularity of the
seasons.
Safely jack the car up and tap the (cold) exhaust with a finger until you
find the shield that's rattly. A big worm-drive hose clamp will shut it up.
You can replace the shields, but they can run over $20 each, and they're a
pain to replace. I only replace mine once they start getting holes in them.
Actually, both my cat shields are getting holey right now, so I'll replace
them this summer.

Signature
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
Tegger - 28 May 2007 02:49 GMT
> jim is right
Sorry... CURLY is right!

Signature
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/