99 ELANTRA STOPLIGHTS/CRUISE CONTROL

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

aj - 25 Jan 2005 21:28 GMT

I DON'T KNOW IS THEY STARTED AT THE SAME TIME BUT MY BRAKELIGHTS (TWO
REAR AND UPPER) AND THE CRUISE CONTROL ARE ALL NOT WORKING.
THE FUSES SEEM TO BE FINE AND AFTER CHECKING THE WIRING DIAGRAM AND
SEEING THAT THESE TWO FUNCTIONS ARE ON THE SAME WIRING CIRCUIT, I
REPLACED THE BRAKE SWITCH WHICH IS ACTIVATED BY THE BRAKE PEDAL. STILL
NOTHING. ANY IDEAS?

Reply to this Message

Matthew Rebbert - 26 Jan 2005 10:36 GMT

AJ,

You can try replacing the light bulbs for the rear brakes. I had an 02
Elantra GT which I had a tail lamp go out and the back 3rd brake light did
not work and cruise control did not work. Replaced bulb and it all worked
again. Might not be it, but its a $1.00 15 minute procedure that might
work.

>I DON'T KNOW IS THEY STARTED AT THE SAME TIME BUT MY BRAKELIGHTS (TWO
> REAR AND UPPER) AND THE CRUISE CONTROL ARE ALL NOT WORKING.
> THE FUSES SEEM TO BE FINE AND AFTER CHECKING THE WIRING DIAGRAM AND
> SEEING THAT THESE TWO FUNCTIONS ARE ON THE SAME WIRING CIRCUIT, I
> REPLACED THE BRAKE SWITCH WHICH IS ACTIVATED BY THE BRAKE PEDAL. STILL
> NOTHING. ANY IDEAS?

Reply to this Message