 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Hyundai Cars / April 20052005 Hyundai Coup? / Tuscani / Tiburon - new stereo
Hi group, I've recently purchased a UK spec Hyundai Coup? (2005 facelift model), and dissapointed as I was with the factory fit unbranded stereo, I've put a clarion cd/mp3 radio in... Only - I can't figure out how to fix the damn unit into the car, so it's currently just wedged in, and wobbles about. How would I go about removing the aluminium effect facia from the car (w/o damaging it!) so that I can access the mount to screw the new unit in tightly? Any help much appreciated!  SignatureLiddle Feesh *fap fap fap fap* <>< <>< <>< <>< ><> <>< <>< <>< <>< <>< <>< Check for screws holding the trim panel in. It's been long enough since I've done one of these (and I've done few enough) that I don't remember specifically how this one comes off. Check for screws around the ashtray. If the console trim meets with the dash trim, you may need to pull the console trim and check for screws underneath. If you have blanks in the switch area there may be screws behind them (but I don't think so on this car). There will be several clips holding the trim onto the dash. "hyundaitech" <notpublic@not.public.com> wrote in message > Check for screws holding the trim panel in. Hi there - thanks for the reply :) I can't seem to find any screws holding this particular panel in. My guess is it should just pop off - but I need a blunt knife or something to test.. Hope I'm right? Any further suggestions? SignatureLiddle Feesh *fap fap fap fap* <>< <>< <>< <>< ><> <>< <>< <>< <>< <>< <>< You're pretty much on the right track. Just try to be careful. Automakers can be pretty ingenious sometimes when it comes to hiding fasteners. yea i had a couple well hidden under my slide out drink holder .... 01 accent after those it came out nice though > You're pretty much on the right track. Just try to be careful. Automakers > can be pretty ingenious sometimes when it comes to hiding fasteners. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.