Hello,

I just replaced the Clifford keyless system with the DEI system on my 99
Sonata.  I got a wire harness (it's all wired in now, 2 remotes, and the
module).  I am trying to program the remotes, but the system doesn't
recognise them.  I went to HMA web and got the instructions, but it
doesn't seem to work.  I am able to get the LED to flash 7 times, but the
remotes wont program:  Here is what I did per the HMA website:

1- Plug the Valet Switch into blue 2-pin port on side of keyless entry
receiver (CPU).
2-  Plug LED into white 2-pin port on side of keyless entry receiver
(CPU).
3  Turn ignition switch to the "on" position.
4  Press and RELEASE Valet Switch seven times.
5  Press and HOLD Valet Switch.
6  LED should respond by flashing seven times.
7  Press button I (lock button) of remote you wish to add.
8  Release Valet button.
9  Turn ignition switch "off".
10  Test each remote for complete function.
.. The remotes don't cause anything to happen.

Thanks